- Eastwood 4:1 Urethane Primer Black and Activator Kit
Eastwood 4:1 Urethane Primer Black and Activator Kit
Item #14007ZP Brand: Eastwood
Eastwood Urethane primer is a two-component black surfacer designed for overall jobs.
- Mixes 4:1 with 50241ZP Activator
- Fills well and builds quickly
- Dries fast and easy to sand
- Apply over epoxy primer, body filler, existing finishes
It fills well, sands easily and provides excellent color holdout for all top coats. Mixes 4:1 with 50241 ZP catalyst. May be applied over Eastwood Epoxy primers, old paint, body filler & even bare metal. Ideal for block sanding in 3-4 hrs after application. kit makes 5 spray-able quarts, includes medium speed activator. Primer is VOC 4.8 lbs per gallon.
About Eastwood 4:1 Urethane Primer Black and Activator Kit
After shaking/stirring primer, thoroughly mix four parts 2K Urethane Primer Sur- facer with one part Urethane Primer Activator
To reduce film build, 4:1 mixture may be cut by up to 20% with a urethane-grade reducer or other appropriate solvent product. Doing this may also improve the flow and leveling of primer. Eastwood suggests using a Zero -VOC reducer to avoid potential compliance issues. Use caution in mixing materials as epoxy primer may begin to gel after approximately two hours (at 70 °F).
SPRAY GUN SETUP
HVLP Gun: Fluid Tip 1.4-1.6 mm Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.4-1.6 mm Spray Pressure 40-50 psi
Conventional Siphon: Fluid Tip: 1.4-1.8 mm Spray Pressure 40-50 psi
Eastwood 2K Urethane Primer Surfacer should be applied in two medium wet coats, with a 10-15 minute flash period between each (at 70 °F). Typically, two coats is enough to achieve the desired 2 mil. dry film thickness, though more material may be applied as needed.
Urethane Primer Surfacer may be topcoated after approximately 30 minutes, or up to 18 hours (at 70 °F with sufficient cross-ventilation), with no additional prep required. After 18 hour recoat window, primer MUST be sanded prior to topcoat application for adhesion purposes.
May be wet sanded after 2-3 hours, or block sanded (dry) after 3-4 hours.
One US gallon, 128 fl ounces
One US quart 32 fl ounces.
Urethane Reducer Medium
Eastwood PRE Painting Prep
Eastwood Concours HVLP Paint Spray Gun w/1.2 Tip
Eastwood Branded Color Paint Chart
Eastwood 4 Stage Desiccant System 1/2" NPT
Paint Gun Accessory Kit
Eastwood 1/4" Digital Regulator
Eastwood Aerosol-Injected Cleaner & Lubricator
Product Information Sheet
This product is designed for trained professionals, read all warnings and safety precautions before applying. always wear eye, skin and respiratory protection when using this product always use in well ventilated area away from open flame.
Made in USA
Customers also viewed:
2K AeroSpray™ High Build Urethane Primer Gray
Starting at: $24.99
The foundation to a great paint jobOnly $169.99
2-component buff surfacer designed for overall jobsOnly $89.99
2-component gray surfacer designed for overall jobsOnly $89.99
Low VOC Urethane Primer Gal KitOnly $119.99
Includes urethane primer, activator, mixing cups...even overallsOnly $99.99
Delivers the shine and miles-deep appearance of a show-quality finishOnly $124.99