• Home
  • Eastwood 4:1 Urethane Primer Black and Activator Kit

Eastwood 4:1 Urethane Primer Black and Activator Kit

Item #14007ZP Brand: Eastwood

2-component black surfacer designed for overall jobs

Details

Eastwood's high-build Urethane Primer is a two-component primer surfacer designed for overall jobs. its impressive fill qualities and superior flexibility and adhesion make this a perfect choice over Eastwood's Epoxy Primer or original paint. This primer block sands easily and provides excellent color holdout for all top coats. Mixes 4:1 with 50241 ZP catalyst. May be applied over old paint, body filler & even bare metal. Ideal for block sanding. 4.8 lbs./gallon.

More info...

About Eastwood 4:1 Urethane Primer Black and Activator Kit

Eastwood's high build Urethane Primer is a two component primer surfacer designed for overall jobs. its impressive fill qualities and superior flexibility and adhesion make this a perfect choice over Eastwood's Epoxy Primer or original paint. This primer block sands easily and provides excellent color holdout for all top coats. Mixes 4:1 with 50241 ZP catalyst. May be applied over old paint, body filler & even bare metal. Ideal for block sanding 4.8lbs/gallon.


Contents

One US gallon, 128 fl ounces One US quart 32 fl ounces.


DONT FORGET THESE PAINTING ESSENTIALS!

SAS Bandit Respirator
Eastwood PRE Painting Prep
2K Epoxy Primer
7 Piece Sanding Block Set
Paint Mixing Cups 1QT
Devilbiss Prep Wipes
Painting Tack Rags
Devilbiss Dekups 24oz
Painters Masking Tape
Painters Masking Paper
Eastwood Air Injected Cleaner
Eastwood Scuff Pads
Razor Blades


Safety

This product is designed for trained professionals, read all warnings and safety precautions before applying. always wear eye, skin and respiratory protection when using this product always use in well ventilated area away from open flame.


Warranty

Made in USA


Application

Mix 4:1 with 50241zp Activator. Can be reduced up to 20% with urethane reducer 50104zp. Using a 1.2-1.6 HVLP fluid tip. Apply in two medium coats with a 10-15 minute flash time between each coat. Optimal conditions are 70°F. may be top coated after approximately 30 minutes. After 18 hour recoat window, surface must be sanded prior to top coat application, or there could be adhesion issues. May be wet sanded 2-3 hours or block sanded after 3-4 hours. See Product Information Sheet 50240INST for more applications and equipment settings.


Customers also viewed: