• Home
  • EW 4:1 Urethane Primer Bluff Gal

    EW 4:1 Urethane Primer Bluff Gal

    Item #14005ZP Brand: Eastwood

    EW 4:1 Urethane Primer Bluff Gal

    Details

    Eastwood's high build Urethane Primer is a two component primer surfacer designed for overall jobs. its impressive fill qualities and superior flexibility and adhesion make this a perfect choice over Eastwood's Epoxy Primer or original paint. This primer block sands easily and provides excellent color holdout for all top coats. Mixes 4:1 with 50241 ZP catalyst. May be applied over old paint, body filler & even bare metal. Ideal for block sanding 4.8lbs/gallon.

    About EW 4:1 Urethane Primer Bluff Gal

    Eastwood's high build Urethane Primer is a two component primer surfacer designed for overall jobs. its impressive fill qualities and superior flexibility and adhesion make this a perfect choice over Eastwood's Epoxy Primer or original paint. This primer block sands easily and provides excellent color holdout for all top coats. Mixes 4:1 with 50241 ZP catalyst. May be applied over old paint, body filler & even bare metal. Ideal for block sanding 4.8lbs/gallon.


    Contents

    One US gallon, 128 fl ounces


    Accessories

    50241 ZP 4:1 Primer Activator Quart 12776 Evolution Paint Gun 10041zp PRE Painting Prep Aerosol, 10094zp Quart 12846Z Aerosol Injected Cleaner 51136 Eastwood Paint Color Chip Chart 50244ZP Eastwood Epoxy Primer 12854 Eastwood Electric Paint Shaker 31160 7pc Dura Block Sanding Blocks


    Safety

    This product is designed for trained professionals, read all warnings and safety precautions before applying. always wear eye, skin and respiratory protection when using this product always use in well ventilated area away from open flame.


    Warranty

    Made in USA


    Application

    Mix 4:1 with 50241zp Activator. Can be reduced up to 20% with urethane reducer 50104zp. Using a 1.2-1.6 HVLP fluid tip. Apply in two medium coats with a 10-15 minute flash time between each coat. Optimal conditions are 70°F. may be top coated after approximately 30 minutes. After 18 hour recoat window, surface must be sanded prior to top coat application, or there could be adhesion issues. May be wet sanded 2-3 hours or block sanded after 3-4 hours. See Product Information Sheet 50240INST for more applications and equipment settings.