- Eastwood Aluma Blast Paint Aerosol 12 oz
Eastwood Aluma Blast Paint Aerosol 12 oz
durable, aluminum-look finish
- Protects up to 300 degreesF
- Acrylic lacquer with low 4-15% gloss
- Aerosol can covers 6 sq. ft.
Do you have a product idea? Click Here to suggest it!
About Eastwood Aluma Blast Paint Aerosol 12 oz
Aluma Blast Paint is specially formulated to duplicate the original look of cast aluminum car parts. Protected up to 300 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on intake manifolds and transmission housings. Buy 3 or more, mix and match, and SAVE!
Aluma Blast is an Acrylic Lacquer that resembles fresh cast aluminum. Works great on Intake Manifolds, Transmission Housings and other cast aluminum parts. One aerosol can covers 6 sq. ft., Max Temp 300F.
Use PRE Painting Prep (10041Z) to remove residual oil, grease, and silicones before coating. Buy 3 or more, mix and match, and SAVE!
Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
Apply 2 medium coats for best results. We recommend PRE Painting Prep (10041 Z) to remove oil. Aluma Blast can be applied directly to bare metal surfaces. Aluma Blast is an Acrylic Lacquer that withstands up to 300 degrees F Each can covers 6 sq ft. For better durability, use our Self Etching Primer (16014 Z) Aerosol, or (16009 ZP) Quart. Use these products in a well ventilated area, or wear a respirator like our SAS Bandit Respirator (11455 or 11456).
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesionOnly $9.99
Duplicate the original metal: Detail Gray, Aluma Blast, Spray GrayOnly $34.99