• Home
  • Eastwood Aluminum Prep and Cleaner Quart Trigger Bottle
Eastwood Aluminum Prep and Cleaner Quart Trigger Bottle is rated 4.6667 out of 5 by 3.
Rated 5 out of 5 by from Miracle Restoration This product was recommended to me on an online forum by an appliance repair expert. Attempting to clean my range hood aluminum grease filters I soaked them in a solution of Oxiclean and they turned black. I thought they were ruined and because they are an unusual size were going to be very expensive to replace. I ordered 1 bottle of Eastwood Aluminum Prep as a last resort and the results were AMAZING. I poured the bottle into a small tub and immersed the filters and by just splashing the solution gently over the filters the black is completely gone and the filters are shiny, clean and look like new.
Date published: 2015-04-14
Rated 4 out of 5 by from Works as advertised. It removed all the rust staining from the thermostat/water crossover on the aluminum intake manifold. Plastic bottle came with a nice fine pattern spray head. Intended to be used sparingly with no waste. Nice product for uncoated aluminum.
Date published: 2015-06-09
Rated 5 out of 5 by from As described I am restoring a rare rx50, I needed something to prep the cases for polish, I used paint remover to remove what was left of the protective coating that was on the cases and then applied this product with a brush, I did it like the directions said, had to clean off and reapply about 4 times to get it to a point where I could polish the cases to a millor shine.
Date published: 2014-12-04
  • 2015-07-03T11:29CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_14107ZP, PRD, sort_relevancy
  • clientName_eastwood

can this product clean or etch polished alum. diamond plate so I can paint it.

Asked by: jented
Yes it is a prep for aluminum as said in the description prior to painting.
Answered by: SeanA
Date published: 2015-05-21

Will this remove oil from the pore space of cast aluminum valve covers?  I want to be able to polish & clear coat the valve covers.

Asked by: Blue666
This product in combination of a wax and grease remover will remove most all impurities
Answered by: SeanA
Date published: 2015-04-20

Could this product be used to clean the undercarriage and or suspension parts on a corvette? Will it damage bushings and creep into steering parts and such? Thanks, Mark

Asked by: Grand Sport Gray
It can be used on the suspension parts, but should ideally be kept away from soft bushings if possible. It's not guaranteed to do any damage to them, but bushings can sometimes be sensitive and they may end up squeaking if they are exposed to chemicals.
Answered by: MikeL
Date published: 2015-03-14

Will this harm the paint on my truck?I want to clean my aluminum  tool box. Thanks

Asked by: Norm
It's best to keep this material off of any painted surface.
Answered by: MikeL
Date published: 2015-01-28

Can Aluminum Prep be used as a finish could after proper cleaning of the aluminum and three applications and rinsings of this product?

Asked by: MG78
  • 2015-07-03T11:16CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_14107ZP, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Aluminum Prep and Cleaner Quart Trigger Bottle

Item #14107ZP Brand: Eastwood

Removes stains, corrosion... brightens aluminum surfaces

Details

Eastwood's Aluminum Prep cleans and etches aluminum surfaces prior to welding, painting or polishing. Powerful oxidizers return aluminum to its original luster. Effectively removes stains, corrosion and will brighten any aluminum surface, thus restoring the surface to look new. Ideal for use on all bare aluminum such as panels, tubing, extrusions, wheels, intake manifolds, marine applications, airplanes and more.

More info...

About Eastwood Aluminum Prep and Cleaner Quart Trigger Bottle

Eastwood's Aluminum Prep cleans and etches aluminum surfaces prior to welding, painting or polishing. powerful oxidizers return aluminum to its original luster. Effectively removes stains, corrosion and will brighten any aluminum surface, thus restoring the surface to look new. Ideal for use on all bare aluminum such as panels, tubing, extrusions, wheels, intake manifolds, marine applications, airplanes and more.


Contents

32 Fluid Ounces, trigger spray bottle


Accessories

10041Z PRE Painting Prep, 12899z Self Etching Weld Thru Primer, 12115 Welding Clamps, 13176ZP Afetr Weld, 13297 Angle Grinder Kit.13107 Buffing Kit, 11983zp Sharkhide, 12499 Z metal Protect


Safety

Always wear proper eye, skin and respiratory protection when using this product. Use in a well ventilated area, away from open flame. Store in a cool dry place at approximate room temperature. Keep out of reach of children.


Warranty

Made in USA


Application

To Clean Aluminum: remove any residual contaminents with a mild solvent Like PRE Painting Prep. Apply Aluminum Prep leberally to surface to be cleaned, let penetrate for 3-5 minutes. Wipe off with a clean cloth. Repeat until desired finish is acheived. To Prep for Welding: Follow same procedure as above and use a stainless steel wire brush to abrade the weld surfaces prior to welding.


Customers also viewed: