• Home
  • Eastwood Anti-Rust Aerosol with ext Nozzle Amber
Eastwood Anti-Rust Aerosol with ext Nozzle Amber is rated 4.75 out of 5 by 4.
Rated 5 out of 5 by from QUALITY PRODUCT The 24" extension nozzle is small enough and flexible enough to get into small places and sprays in a 360 degree pattern. It sprays out as a thin liquid but sets up within 1-2 hours as a thick tacky substance. I have a 2012 Silverado truck that I used the extension nozzle in the existing inner fender holes to coat the inside fender seams and the bumpers. I used the red spray straw to coat large areas like the inner fender wells. To coat the front and rear inner fenders and both bumpers it took 2 cans. To heavily coat the rear fender wells with the red spray straw it took 1 can.
Date published: 2014-12-11
Rated 5 out of 5 by from Works well! I did drill four 1/2 inch holes in the lower door ends in my 2011 F - 150 crew cab ( one in each door ) to make the application easy. This should eliminate the rust in the lower seams due to the heavy use of salt in the midwest. Two cans was more than enough to treat the rocker panels and lower tailgate seams. May need to tape a length of wire to the tubing to keep it ridged and buy access hole plugs at the local hard wear store.
Date published: 2014-11-04
Rated 4 out of 5 by from Works well The flexible nozzle sprays in several directions at once and allows you to keep the can vertical. The sprayed material can seep into crevices and seal them. It takes several days for the smell to go away and that may have been because I sprayed a lot into inside of the trunk lid.
Date published: 2014-08-02
Rated 5 out of 5 by from worked flawlessly the extension nozzle worked great for applying the product inside of doors without drilling any access holes
Date published: 2014-03-30
  • 2015-05-05T11:37CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_26018Z, PRD, sort_relevancy
  • clientName_eastwood

how do you typically access the inside of the rockers? How much is typically needed for a mid size 4 door car (BMW E30)

Asked by: bobv
You can generally access the rockers through access holes that are already there. If there are no access holes, we offer a Unibit and plugs that can be used to cap the holes. http://www.eastwood.com/unibit-drill-bit-for-undercoating-plugs.html Most cars will require 1-2 cans.
Answered by: NickC
Date published: 2014-11-10

Is epoxy primer compatible with this product?

Asked by: robertwhite29
If you mean epoxy over top of it, NO. Heavy duty anti rust is a thick waxy coating that can technically go over any surface and coat it. But if you have epoxy down already and want to spray over top it would work.
Answered by: SeanA
Date published: 2014-10-31
  • 2015-05-05T12:03CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_26018Z, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Anti-Rust Aerosol with ext Nozzle Amber

Item #26018Z

Spray inside doors and rockers, where painting won't be required; amber

Details

Heavy-Duty Anti Rust's spray-on wax film sticks to bare metal or painted surfaces and won't crack, flake, or peel. Will self-heal if scratched. Use inside doors and rockers, where painting will not be required. Forms an air and water tight barrier which prevents and slows rust. Product can also be used to protect fresh machined surfaces and bare metal parts during storage, and works great to seal body seams that are inaccessible. includes 24" aerosol extension wand for hard to reach places.
To clean your conical extension nozzle, remove the button and nozzle and attach to a can of Eastwood’s PRE Painting Prep (10041z or 11949z). Be sure to wear eye protection when swapping nozzles. Purge the PRE through the nozzle in short blasts until you are sure all contaminants are removed.

More info...

About Eastwood Anti-Rust Aerosol with ext Nozzle Amber

Heavy-Duty Anti Rust's spray-on wax film sticks to bare metal or painted surfaces and won't crack, flake, or peel. Will self-heal if scratched. Use inside doors and rockers, where painting will not be required. Forms an air and water tight barrier which prevents and slows rust. Product can also be used to protect fresh machined surfaces and bare metal parts during storage, and works great to seal body seams that are inaccessible. includes 24" aerosol extension wand for hard to reach places.


Contents

13.5 oz of Anti-Rust and 24" extension nozzle


Accessories

10041z PRE Painting prep Use PRE to clean the extension nozzle. Use 11949z low VOC PRE for regulated areas.


Application

Use the extension nozzle to get into hard to reach places, such as rocker panels, inner fenders, trunk recesses and inner door frames.The extension wand has only been tested on specific Eastwood products Eastwood cannot confirm compatibility with other brands and or products.


Safety

Always wear eye, skin and respiratory protection. Always use in a well ventilated area away from an open flame Consult MSDS for specific safety warnings and precautions


Warranty

MADE IN THE USA


Application

Use the extension nozzle to get into hard to reach places, such as rocker panels, inner fenders, trunk recesses and inner door frames. The extension wand has only been tested on specific Eastwood products Eastwood cannot confirm compatibility with other brands and or products.


Customers also viewed: