• Home
  • Eastwood's Brown Sugar w/Activator

Eastwood's Brown Sugar w/Activator

Item #13987ZP

Premium acrylic urethane topcoat for exceptional long-lasting beauty

Details

Eastwood Brown Sugar is a premium, true acrylic urethane Topcoat for exceptional long-lasting beauty and durability Eastwood Brown Sugar Topcoat offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. 3:1 single-stage topcoat system includes activator.
  • 2-component topcoat system
  • Superior to acrylic, alkyd and lacquer coatings
  • Unsurpassed durability and resistance to UV, chemicals, annoying stone chips
  • 96 fl. ozs. covers about 400 sq. ft.

About Eastwood's Brown Sugar w/Activator

Eastwood's Brown Sugar is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. Included 96 Fl. Oz of3


Contents

96 Fluid Ounces of SSU Paint 32 Fluid Ounces of Urethane Activator


Accessories

12776 Evolution HVLP Composite Paint Gun 51550 Concours HVLP Paint Gun 20474 4-Stage Desicannt System 12573ZP Clean & Prep Kit 12854 Electric Paint Shaker 12114 Paintucation 5 DVD Set 20397 Pure Air Respirator System 51561Z Liquid Ice Polishing System


Safety

Always wear appropriate eye, skin and breathing protection. Always paint in a well ventilated area away from open flame Consult MSDS for specific safety instructions


Warranty

Made in USA


Application

Clean surfaces of all contaminents. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesions. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator Use caution mixing materials as paint may begin to gel after 2 hours at 70Ö. HVLP gun setting 8-10psi 1.4-1.8mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours Refer to 50200INST for more information


Customers also viewed: