• Home
  • Eastwood Carpet and General Purpose Spray Adhesive 14 oz net Aerosol

Eastwood Carpet and General Purpose Spray Adhesive 14 oz net Aerosol

Item #12743Z Brand: Eastwood

Perfect adhesive for virtually any carpet, trim application

Details

Eastwood Carpet Spray Adhesive Is the perfect adhesive for virtually any carpet and trim application. Especially designed for bonding to Thermocoustic Sound Deadener, vinyl tops, heavyweight headliners.Offers high immediate bond strength, excellent heat and water resistance, long bonding range. Its unique "webbing" spray pattern ensure excellent coverage and an even film thickness. To apply simply spray onto both surfaces, let sit for a few minutes and apply the surfaces together.

About Eastwood Carpet and General Purpose Spray Adhesive 14 oz net Aerosol

Eastwood Carpet Adhesive Is the perfect adhesive for virtually any carpet and trim application. Especially designed for bonding to Thermoscustic Sound Deadener, vinyl tops, heavyweight headliners.Offers high immediate bond strength, excellent heat and water resistance, long bonding range. Its unique "webbing" spray pattern ensure excellent coverage and an even film thickness. To apply simply spay onto both surfaces, let sit for a few minutes and apply the surfaces together.


Contents

14.1 OZ NET WEIGHT


Accessories

12117 Thermocustic Sound Deadener 10041Z PRE painting prep 43459 Interior pry bar set 52050 Hand application roller 52144 30' insulation Tape 40013 Vinyl and dashboard repair kit 40025 Plastic Repair Kit


Application

Make sure both surfaces are clean and debris free. Liberally apply Adhesive to both surfaces ensuring good coverage, but do not over apply as lumping could occur. Let adhesive tack up for 2-3 minutes before attaching to other substrate. Use a roller or your hand to ensure both substrates are in complete contact. Full cure in 6-12 hours depending on conditions.


Safety

Always use in a well ventilated area always wear proper eye, skin and respiratory protection consult MSDS for specific warnings and precautions.


Warranty

MADE IN CANADA


Application

Make sure both surfaces are clean and debris free. Librally apply Adhesive to both surfaces ensuring good coverage, but do not over apply as lumping could occur. Let adhesive tack up for 2-3 minutes before attaching to other substrate. Use a roller or your hand to ensure both substrates are in complete contact. Full cure in 6-12 hours depending on conditions.


Customers also viewed: