• Home
  • Eastwood Ceramic Caliper Paint Kit Black
Eastwood Ceramic Caliper Paint Kit Black is rated 3.6667 out of 5 by 3.
Rated 1 out of 5 by from Not satisfied Not satisfied with finished product. I consider myself pretty good with a brush and rattle can. I chose to brush on and followed directions on can. Fought paint runs and inconsistent coverage during application. After applying 2 coats and letting dry I ended up sanding calipers to bare metal and starting over. i ended up using VHT caliper paint from a rattle can which gave much better results. I'd guess your product is best when sprayed on and application is above my skill set?
Date published: 2013-07-16
Rated 5 out of 5 by from Very Satisfied I highly advise purchasing the urethane/ceramic activator. I used this kit with the activator and the provided foam brush with fantastic results. Great coverage, smooth rock hard finish and the dry time was better than expected.
Date published: 2014-04-29
Rated 5 out of 5 by from Excellent tried this paint and calipers came out fine. Covered better than expected. Just as advertised.
Date published: 2010-03-18
  • 2015-03-30T11:02CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_11839Z, PRD, sort_relevancy
  • clientName_eastwood

Eastwood Ceramic Caliper Paint Kit Black

Item #11839Z

Nano-ceramics for heat resistance;
kit preps and paints 4 calipers

Details

Eastwood's urethane caliper paints are the only caliper coatings on the market to use nano-ceramic technology. These durable paints resist heat and road grime and brake dust wipe off easily. You can apply these without disassembling the brake assemblies. Or paint new components before they go on the car. This coating is resistant to high temperatures, UV sunlight and most chemicals. For added gloss and durability, add Eastwoods 4:1 urethane activator, 21854 Z. This kit comes with everything you need to prep and paint four calipers. Great for brake drums too! Kit includes 16 ounces of EW Caliper paint, one PRE paint prep

More info...

About Eastwood Ceramic Caliper Paint Kit Black

Eastwood's urethane caliper paints are the only caliper coatings on the market to use nano-ceramic technology. These durable paints resist heat to 650³F and road grime and brake dust wipe off easily. You can apply these without disassembling the brake assemblies. Or paint new components before they go on the car. This coating is resistant to high temperatures, UV sunlight and most chemicals. For added gloss and durability, add Eastwoods 4:1 urethane activator, 21854Z. This kit comes with everything you need to prep and paint four calipers. Great for brake drums too!


Contents

EW Caliper Paint 16 oz PRE paint prep aerosol 10041Z 3 Poly foam brushes 1 quart mixing cup and lid


Accessories

21854Z EW Urethane activator- will add gloss and durability


Safety

always wear eye, skin and respiratory protection when applying paints. use in a ventilated area consult product MSDS for cautions and safety warnings.


Safety

always wear eye, skin and respiratory protection when applying paints. use in a ventilated area consultproduct MSDS for cautions and safety warnings.


Warranty

Made in USA


Application

Disc Brake calipers brake drums Brake compnents suspension components to apply- clean surface with PRE, make sure it is free of oils, grease and debris. Using the supplied foam brush apply a light base cioat to surface. let dry 30-60 minutes, apply second coat. Fully cured in 18-24 hours.