• Home
  • Eastwood Ceramic Engine Paint Quart 66-80 Ford Dark Blue

Eastwood Ceramic Engine Paint Quart 66-80 Ford Dark Blue

Item #777 51623ZP Brand: Eastwood

Ceramic nano-technology engine
enamel withstands 650°F

Details

Eastwood's "Ford Dark Blue" Ceramic Engine Paint withstands up to 650 degreesF Super-durable, high-temp engine paint utilizes ceramic nano-technology to produce a beautiful, factory-look finish that protects your engine and resists chips, chemicals and heat.
  • Withstands up to 650 degreesF (highest in the industry!)
  • Easy to apply – brush or spray
  • 1-quart can covers approx. 40 square feet
  • For additional durability and gloss, add Urethane Activator 21854Z

About Eastwood Ceramic Engine Paint Quart 66-80 Ford Dark Blue

Eastwood's Ceramic Engine Enamels provide a beautiful factory look finish that is super-durable and will withstand temperatures up to 650³ F. Developed using the latest ceramic nano-technology integrated with silicone alkyds, this is the new standard in engine coatings. Each color is replicated after the original color for that deep rich factory look. The ceramic nano-technology ensures that your motor will be protected and resist small chips, chemicals and heat. In fact this is the highest temperature range in the industry, 650³ F! NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS


Contents

32 Fluid Ounces 1 US Quart


Accessories

Eastwood offer a wide variety of underhood and undercart coatings. Exhaust manifold Paints Underhood black 10024z 10032z Spray Gray, 10109Z Aluma-Blast, 10036z Detail Gray PRE 10041z & 10194zp Underhood detailing kit 10426z Long term engine storage bag kit 50470 Engine rebuilding tools and installation equipment


Instructions


Click Here for Material Safety Data Sheet
<

Click here for product information sheet


Safety

Always wear eye, skin and respiratory protection. Consult MSDS for specific safety precautions. Always use in a well ventilated area.


Warranty

Made in USA


Application

To apply simply clean all surfaces with PRE (10041Z or 10194ZP) to remove all oils and greases, apply Ceramic Coating using a brush or spray gun. Two coats may be needed for full coverage. Some reduction up to 10%, may be needed to spray, use EW reducer 50104ZP. No primer is necessary and allow 24 hours to fully cure NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS