- Eastwood Chassis Black Gloss Aerosol 14 oz
Eastwood Chassis Black Gloss Aerosol 14 oz
- Resists corrosion, chips and scratches
- Resists brake fluid, fuel and solvents
- Matches OEM finish
- Apply multiple coats without lifting
About Eastwood Chassis Black Gloss Aerosol 14 oz
Eastwood's Original Chassis Black is formulated to provide you with the right sheen, durability and long lasting great looks. Its 85% gloss level is correct for many factory restorations or use in a custom application. Ideal for frames, suspension components, roll bars, differentials, floor boards 'Â°F. One aerosol can covers approximately 8 square feet.
One 15 ounce net weight can. One can covers about 8 Sq.Ft.
Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
Ensure surface is clean, prior painting. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320 grit abrasive. DO NOT USE OVER SELF-ETCHING PRIMERS. Apply to surface about 8-10 inches from surface. Itâ€™s better to apply several light coats than one heavy coat. Ideal conditions 70Â°F to 90FÂ° at 50% humidity. Conditions will affect dry times. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours depending on conditions. If recoating after 36 hours, scuff surface with 320 grit abrasive.
Customers also viewed:
The perfect lacquer for a correct, OEM-matching finish under the hood
Starting at: $12.99
Removes silicone, wax, polish, grease; promotes paint/powder adhesion