• Home
  • Eastwood Chassis Black Gloss Aerosol 14 oz
Eastwood Chassis Black Gloss Aerosol 14 oz is rated 4.3333 out of 5 by 9.
Rated 5 out of 5 by from Fantastic Coating, as always! Have used this stuff sporadically for years and never fails to satisfy. Bead-blasted all four 54 F-100 brake backing plates to bare metal for shoe-contact repairs and wanted to add coating. Knowing Self-etch primers aren't allowed with CB and not wanting to diddle with other primers, just sprayed in onto the bare metal per directions. Sprays nicely (dunno what others are talking about with leaky cans), dries hard and nicely glossy (not too glossy), and noticed no signs of lousy adhesion during installation 1.5 weeks later (winter ~53 degrees out). PERFECT coating for my brake job since product descriptive notes resistance to brake fluid. Highly recommended!
Date published: 2012-01-04
Rated 5 out of 5 by from Great product, as advertised Very nice paint product. I love the spray nozzles for the spray pattern. Fans out nicely so that you can tack coat lightly and then apply the final coat for a nice gloss finish. Had absolutely no trouble with the nozzles. Simply soak nozzle for 2 minutes in laquer thinner and blow clear with compressed air between coats while you are waiting for it to dry. Final coat dries completely and glossy if you leave it alone overnight. Chassis Black Gloss generated compliments for the underside of my '28 Ford metal floor panels.
Date published: 2011-12-18
Rated 3 out of 5 by from Leaves smudges All of Eastwood's products that I have purchased have worked well and lived up to their claims. The Original Chasis Black goes on nice, looks good, but even after a couple of months now will still leave a black smudge if your hand, arm or whatever presses up against it. Light contact won't for the most part. But, the areas aren't as glossy especially after repeated contact. I'll be trying the new chassis blacks that they have next.
Date published: 2009-09-21
Rated 4 out of 5 by from Good paint Paint works well, gives a tough finish. I used it on suspension parts and assorted hardware. Painted nuts and bolts held up to installation without chipping. Coverage is good - give a light first coat then follow with 1 or 2 regular coats. Parts do need 24 hours to fully dry. Paint is not very chemical resistant, lacquer thinner will easily remove dried paint.
Date published: 2013-10-28
Rated 3 out of 5 by from Great paint, marginal spray cans I like the color for accurate restoration work on GM cars, and the finish is tough. However, I have not been happy with the spray cans. The nozzles are inconsistent in pattern and often leak or block. Since I have several cans, I have had to switch nozzles saving those from used cans to complete work.
Date published: 2009-12-12
Rated 5 out of 5 by from Good Product I have used this product for several years on my antique cars. It has worked well on chassis, waterpumps, etc. I allow 48 hours to cure, but at times have done 24 hours . It sprays on even and I recommend it for many jobs, just start with a clean dry surface before painting.
Date published: 2014-01-11
Rated 4 out of 5 by from Works just like advertised Covers nice and has just the right amount of gloss. Used for all engine sheet metal in my VW van as well as frame and pan. Looks very rich and so far holding up well.
Date published: 2012-07-16
Rated 5 out of 5 by from excellent excellent finish very durable and easy to clean. I used it on my 68 chevy truck frame and it looks awsome!!!
Date published: 2013-03-10
  • 2015-03-02T10:07CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_10000Z, PRD, sort_relevancy
  • clientName_eastwood

Eastwood Chassis Black Gloss Aerosol 14 oz

Item #10000Z

Original long-lasting formula resists chips, corrosion, temps to 300°F

Details

Eastwood’s Original Chassis Black Gloss is the perfect coating at the perfect price for any under car component Authentic 85% gloss looks great on suspension parts and frame. Tough, long-lasting formulation resists chips, corrosion and temperatures up to 300 degrees F, so it's perfect for the value-conscious enthusiast who wants a factory-fresh look while staying within a budget.
  • Resists corrosion, chips and scratches
  • Resists brake fluid, fuel and solvents
  • UV-resistant
  • Matches OEM finish
  • Apply multiple coats without lifting

More info...

About Eastwood Chassis Black Gloss Aerosol 14 oz

Eastwood's Original Chassis Black is formulated to provide you with the right sheen, durability and long lasting great looks. Its 85% gloss level is correct for many factory restorations or use in a custom application. Ideal for frames, suspension components, roll bars, differentials, floor boards '°F. One aerosol can covers approximately 8 square feet.


Contents

One 15 ounce net weight can. One can covers about 8 Sq.Ft.


Warranty

Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


Application

Ensure surface is clean, prior painting. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320 grit abrasive. DO NOT USE OVER SELF-ETCHING PRIMERS. Apply to surface about 8-10 inches from surface. It’s better to apply several light coats than one heavy coat. Ideal conditions 70°F to 90F° at 50% humidity. Conditions will affect dry times. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours depending on conditions. If recoating after 36 hours, scuff surface with 320 grit abrasive.


Customers also viewed: