• Home
  • Eastwood Chassis Black Gloss Aerosol 14 oz

    Eastwood Chassis Black Gloss Aerosol 14 oz

    Item #10000Z

    Original long-lasting formula resists chips, corrosion, temps to 300°F

    Details

    Eastwood’s Original Chassis Black Gloss is the perfect coating at the perfect price for any under car component Authentic 85% gloss looks great on suspension parts and frame. Tough, long-lasting formulation resists chips, corrosion and temperatures up to 300 degrees F, so it's perfect for the value-conscious enthusiast who wants a factory-fresh look while staying within a budget.
    • Resists corrosion, chips and scratches
    • Resists brake fluid, fuel and solvents
    • UV-resistant
    • Matches OEM finish
    • Apply multiple coats without lifting

    About Eastwood Chassis Black Gloss Aerosol 14 oz

    Eastwood’s Original Chassis Black is formulated to provide you with the right sheen, durability and long lasting great looks. Its 85% gloss level is correct for many factory restorations or use in a custom application. Ideal for frames, suspension components, roll bars, differentials, floor boards and much more. Fortified with high solids and epoxy, Chassis Black resists chips, UV rays and high temperatures up to 300°F. One aerosol can covers approximately 8 square feet. Buy 3 or more and save!


    Contents

    One 15 ounce net weight can. One can covers about 8 Sq.Ft.


    Warranty

    Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


    Application

    Ensure surface is clean, prior painting. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320 grit abrasive. DO NOT USE OVER SELF-ETCHING PRIMERS. Apply to surface about 8-10 inches from surface. It’s better to apply several light coats than one heavy coat. Ideal conditions 70°F to 90F° at 50% humidity. Conditions will affect dry times. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours depending on conditions. If recoating after 36 hours, scuff surface with 320 grit abrasive.


    Customers also viewed: