- EW Chassis Black Satin Aerosol 14 oz
EW Chassis Black Satin Aerosol 14 oz
Chassis Black Satin is the perfect chassis paint at the perfect price for any undercarriage component.
- Resists corrosion, chips and scratches
- Chassis Black also resists brake fluid, fuel and solvents
- Undercoating matches OEM finish
- Apply multiple coats without lifting
Not glossy, not dull, just right! Authentic 60-70% gloss undercoating looks great on suspension parts and frame. Tough, long-lasting auto chassis paint resists chips, corrosion and temperatures up to 300°F, so it's perfect for the value-conscious enthusiast who wants a factory-fresh look from one of the best chassis paints, while staying within a budget.
Note: This paint can not be applied over top of self-etching primers.
"This paint is great. I've used it in restoring my 1970 Chevelle and the paint is everything it is claimed to be and more." — Barstow, CA
About EW Chassis Black Satin Aerosol 14 oz
Eastwoodâ€™s Chassis Black Satin is formulated to provide you with the right sheen, durability and long lasting great looks. Its 60-70% gloss level is correct for many factory restorations or use in a custom application. Ideal for frames, suspension components, roll bars, differentials, floor boards and much more. Fortified with high solids and epoxy, Chassis Black resists chips, UV rays and high temperatures up to 300Â°F. One aerosol can covers approximately 8 square feet. Buy 3 or more and save!
One 15 oz. aerosol can covers 8 Sq. ft, Max Temp 300F. Average car needs 3 to 5 cans.
Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
Ensure surface is clean, prior painting. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320 grit abrasive. DO NOT USE OVER SELF-ETCHING PRIMERS. Apply to surface about 8-10 inches from surface. Itâ€™s better to apply several light coats than one heavy coat. Ideal conditions 70Â°F to 90FÂ° at 50% humidity. Conditions will affect dry times. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours depending on conditions. If recoating after 36 hours, scuff surface with 320 grit abrasive.
Customers also viewed:
Durability and precision of a 2-component coating, without the paint gun
Starting at: $23.99
Our most durable, chemical-resistant, easiest-to-spray, chassis black
Starting at: $14.99
Original long-lasting formula resists chips, corrosion, temps to 300°F
Starting at: $12.99
3X more resins make it 3X more durable than original Chassis Black
Starting at: $16.99
15-oz. aerosol reformulated with TWICE the corrosion resistance!
Original long-lasting formula resists chips, corrosion, temps to 300°FOnly $39.99