- Eastwood Chassis Kleen 18 oz Aerosol
Eastwood Chassis Kleen 18 oz Aerosol
Item #12196Z Brand: Eastwood
Clean grimy chassis and suspension parts with Eastwood's aggressive Chassis Kleen™ Aerosol Spray.
- Use it to clean under car areas prior to painting
- Huge 18-oz. can means you'll have enough for the job
- Not for use on sensitive electronic equipment or painted surfaces
Eastwood's Chassis Kleen™ is a strong, general-purpose, aerosol cleaner developed exclusively for chassis and suspension parts.
About Eastwood Chassis Kleen 18 oz Aerosol
Eastwood's Chassis Kleen is an aggressive general purpose aerosol cleaner developed exclusively for chassis and suspension parts. Use Chassis Kleen to clean undercar areas prior to painting. The large 18 ounce can ensures you will have plenty of Chassis Kleen to do the job. This can is 15% larger than any other general purpose cleaner found in auto parts stores. Not for use on sensitive electronic equipment or painted surfaces- this stuff is aggressive! Not for use or sale in CA, product is too aggressive. 45% VOC content, check your local and state regulations before purchasing this product.
18 oz net weight
PRE Painting Prep 10041Z Respirator 11456 Gloves Safety goggles
Q: Why can't I use this in CA? A: This product is too aggressive for CA EPA standards and is banned. Q: What is the VOC level? A: 45%. Check your local and state regulations before purchasing
Always use in a well ventilated area. Always wear respiratory, eye and skin protection when using this product. Consult MSDS for specific precautions. Do not inhale. Do not get into eyes. Because this product is so aggressive, test on a small area before using on larger areas. This product will damage paint and sensitive electronics.
Made in Canada
Always wear respiratory, eye and skin protection when using this product. Because this product is so aggressive, test on a small area before using on larger areas. This product will damage paint and sensitive electronics. To Apply: using a wire brush, remove loose debris. Hold can 6 to 8 inches from surface and spray using a side to side motion. Be careful not to apply to painted surfaces. Wipe down with rag while wet. If you are painting the surface, apply Eastwood's PRE (10041z) to remove any residual solvents.
Questions & Answers
Customers also viewed:
"Paint Over Rust" chassis coat in semi-gloss black
Starting at: $24.32
Durability and precision of a 2-component coating, without the paint gun
Starting at: $22.99
Our most durable, chemical-resistant, easiest-to-spray, chassis black
Starting at: $14.99