- Home
- Eastwood Chassis Kleen 18 oz Aerosol
Details
Clean grimy chassis and suspension parts with Eastwood's aggressive Chassis Kleen™ Aerosol Spray
Eastwood's Chassis Kleen™ is a strong, general-purpose, aerosol cleaner developed exclusively for chassis and suspension parts.
- Use it to clean undercar areas prior to painting
- Huge 18-oz. can means you'll have enough for the job
- Not for use on sensitive electronic equipment or painted surfaces
Eastwood Brake Gray - Brake Fluid Resistant PaintOnly $19.99 Sale $14.99 |
Eastwood Radiator Black PaintStarting at: $14.99 |
Clear Zinc Aerosol 12 oz
Only
$14.99
As low as:
$14.49
|
About Eastwood Chassis Kleen 18 oz Aerosol
Chassis Kleen's 18-oz. can is 15% larger than other general-purpose aerosol cleaners found in auto parts stores, so you won't run out quickly. But don't use it on sensitive electronic equipment or painted surfaces — this stuff is aggressive!
Not for sale or use in California. Formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others. 45% VOC content.
Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.
18-oz. aerosol of Chassis Kleen™
Because Chassis Kleen™ is so aggressive, first test on a small area. This product will damage paint and sensitive electronics.
To apply, first use a wire brush to remove loose debris. Hold can 6" to 8" from surface and spray using a side-to-side motion, being careful not to apply to painted surfaces. Wipe down with rag while wet. If you will be painting the surface, apply Eastwood's PRE (10041Z) to remove any residual Chassis Kleen solvents.
To apply, first use a wire brush to remove loose debris. Hold can 6" to 8" from surface and spray using a side-to-side motion, being careful not to apply to painted surfaces. Wipe down with rag while wet. If you will be painting the surface, apply Eastwood's PRE (10041Z) to remove any residual Chassis Kleen solvents.
(Q) Why can't I use this in California?
(A) This product is too aggressive for California EPA standards and is banned from use in that state.
(Q) What is the VOC content level?
(A) 45%. Check your local and state regulations before purchasing.
(A) This product is too aggressive for California EPA standards and is banned from use in that state.
(Q) What is the VOC content level?
(A) 45%. Check your local and state regulations before purchasing.
Always use in a well-ventilated area. Always wear respiratory, eye and skin protection when using this product. Consult MSDS for specific precautions. Do not inhale. Do not get into eyes. Because this product is so aggressive, first test on a small area. This product will damage paint and sensitive electronics.













