• Home
  • Eastwood Concours Gun and 24oz DeKups Kit
Eastwood Concours Gun and 24oz DeKups Kit is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from concours 24 oz gun is excellent The concours 24 oz. gun is great. it put down a mirror finish straight out of the box. Very little finish work was needed to produce a paint that looked like you were looking into a mirror.
Date published: 2014-04-09
  • 2015-05-03T10:45CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_11506, PRD, sort_relevancy
  • clientName_eastwood

Can I spray latex acrylic on finished cabinets with this as well as mouldings? Need spray width from 2" - 6"

Asked by: Rick80
Gravity fed HVLP paint guns do not do well with latex paints unless the product is significantly thinned. A better option would be a turbine or an airless sprayer.
Answered by: MikeL
Date published: 2015-03-14

You say a home compressor will keep up with this gun. I have a craftsman 20 gal. 5 hp compressor that makes 8.4 SCFM@ 40 psig and 6.2 SCFM@ 90 psig will this keep up with this gun if I want to paint a car? 

Asked by: rickmt57
Yes, that compressor will work well with the Concours gun. The compressor's output should always meet or exceed the air usage of the tool you're using.
Answered by: MikeL
Date published: 2015-01-05
  • 2015-05-03T09:47CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_11506, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Concours Gun and 24oz DeKups Kit

Item #11506 Brand: Eastwood

Affordable Concours sprays a beautiful finish; needs just 4 cfm


"High-End" Concours Paint Gun Kit helps you spray-on a beautiful "collector-car" finish...yet it's powered by your home compressor with only 4 cfm @ 29 psi! No need to buy an expensive professional paint gun when Eastwood's full-size HVLP Concours Paint Gun has the same "high-end" features, but at a fraction of the cost! And your home compressor provides all the air power you need (4 cfm @ 29 psi) to work with this Concours paint gun.
  • Includes 3 stainless steel needle/nozzle/air caps (1.2, 1.4 and 1.8mm)
  • Comes with DeKups Starter Kit for less mess, easier clean-up
  • Anodized adjustment knobs and air cap ring
  • Lightweight, satin-finished aluminum body
  • Compatible with most home-shop compressors
  • Backed by Eastwood's 10-year limited warranty

More info...

About Eastwood Concours Gun and 24oz DeKups Kit

The Eastwood Concours HVLP gravity-feed paint gun is an aluminum-bodied gun built for working comfort, reliability and years of service. With a working pressure of 29 psi and requiring only 4 cfm, this gun is ideal for the professional or hobbyist. The needle/nozzle and passages are stainless steel, making it compatible with both solvent and waterborne coatings. Includes tool kit, 1/4" NPT connection and DeKups Kit.


51550 Eastwood HVLP Gun with 1.2mm Cap/Needle/Nozzle for basecoats
51552 1.4mm Cap/Needle/Nozzle for clear coats
51553 1.8mm Cap/Needle/Nozzle for primers
51550B Teflon-Coated Aluminum Cup, 600cc
51550A Plastic Cup, 600cc
50207 DeKups-Concours Adapter
51136 Eastwood Paint Chip Chart
29954 The 24-oz. DeKups Starter Kit from DeVilbiss helps you avoid paint spills and eliminate cup cleaning. DeKups are easier to use than other disposable systems because they lock-on the gun better and are easy to remove and replace. 24-oz. starter kit includes: FinishLine gun adaptor, 1 reusable cup and collar, 8 disposable liners and lids, 1 funnel, 1 filter, 5 shaker plugs, measuring guide.


51559 Digital Regulator
50040ZP Master Paint Kit
20474 4-Stage Air Dryer System
51537 Complete Garage Air Line System
10194ZP PRE Painting Prep 30 oz.
51561Z Liquid Ice Buffing System


Always wear eye, skin and respiratory protection. Follow tech data sheet and MSDS of the paint you are applying. Always follow paint manufacturer's safety information. Always paint in a well-ventilated area, away from open flame and sparks.

Customers also viewed: