• Home
  • Eastwood Concours Paint Gun w/3 tips Plastic&Metal Cup
Eastwood Concours Paint Gun w/3 tips Plastic&Metal Cup is rated 4.2222 out of 5 by 9.
Rated 4 out of 5 by from Wow! I unpacked this gun, put in the 1.8 to spray some primer, (it was the second coat on a test piece) it laid down the nicest coat I have sprayed yet. I set the gun up as follows; I turned the fan control to full minus a quarter turn, the air pressure knob to full, and the flow knob to three full turns. The pressure regulator was spraying 10 PSI with the trigger pulled, wow what a nice coat. If it keeps spraying like this I highly recommend this gun. Straight out of the box, Awesome!
Date published: 2012-11-11
Rated 2 out of 5 by from Okay gun but parts dont fit?? I had no complaints for the gun other than the air inlet adapter had locktite on the threads and made it almost impsossible to take off without scratching the gun. The reason i took off the adapter is because it wasn't enough threads on it to make the seal for my pressure regulator. So expect to purchase new adapter if you are using a different brand regulator. The main concern of mine was the 600cc aluminum cup didn't even fit the gun!!!!. The plastic gun worked great right threads what you would expect but the aluminum cup is another story. I could get about half a turn and it gets stuck like if it isn't even the right threads. Maybe i they just gave me the wrong cup.
Date published: 2011-07-26
Rated 4 out of 5 by from Very versatile, Good buy Easy to use and clean. Good spray pattern and flexibility, can be used to spray heavy primer surfacer or clear with the different tip sizes but I had best results using the small 1.2 mm tip for all. Needs a little more air and pressure than advertized to spray high solids like single stage urethanes.
Date published: 2010-01-28
Rated 5 out of 5 by from Nice looking and feeling Gun It will be several weeks before I can give an honest review of this Gun. But just looking at it, inside and out I am very impressed with the overall fit and finish of this Gun. Everything looks and fits well. It fits my hand perfectly and I can hardly wait to use it!My vehicle project is many weeks away....maybe I will re-coat the metal patio furniture?? I am happy with the price,customer service and speed of shipping service.shipping. I will update my review after a few small projects.
Date published: 2014-06-18
Rated 5 out of 5 by from GREAT GUN AT GREAT PRICE IV,E USED MY GUN NOW FOR ABOUT 6 MONTHS IT WORK'S GREAT ON SINGLE STAGE AS WELL AS 2 STAGE PAINT'S . IT'S EASY TO CLEAN AND TO ADJUST THE PATTERN . I'D BUY ANOTHER ONE TOMARROW.ALSO GREAT FOR CLEARING I USE THE 1.4 TIP.
Date published: 2011-07-21
Rated 4 out of 5 by from Great I love it, I have 4 guns I bought this gun 1st off cause your able to spray both water based and solevent based products with very easy clean up. I think the gun does have great spray pattern and will last a long time.
Date published: 2010-04-21
Rated 5 out of 5 by from Worked great. I am a mechanic by trade and just starting to get into painting. Doing painting out of my home shop, 60 gal compressor. I decided on this gun due to the good reviews I've read. I've only painted some test panels but it laid the paint, primer, metallic, pearls and clears down great, better than I was expecting. From my experience I had to 'slow down', and put the paint on 'wetter'. 2 coats primer, 2 base coat, 8 pearls, and 3 clears end result was a near factory finish. Highly recommend!
Date published: 2015-01-20
Rated 4 out of 5 by from Concours Paint Gun w/3 tips Haven't use it yet, too cold. Easy to order, price change within a few days after I ordered to a lower price so I called Customer Service and they refunded me the difference. The only comment I have is that I wished that it came with a plastic holding case inorder to keep everything together.
Date published: 2015-01-12
  • 2015-04-01T10:01CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_51605, PRD, sort_relevancy
  • clientName_eastwood

can I get a 2.0 tip for this paint gun to spray primer filler?

Asked by: smtty86019
We only have a 2.2 tip for the concours gun for poly primers/ fillers
Answered by: SeanA
Date published: 2015-01-19

how do these gravity guns work when painting upside down ( such as interior cabins )?  I have a Fuji gun that has the cup offset and it rotates 360 to allow upside down painting.

Asked by: jerryb
They will not work upside down. In order to spray with the gun inverted you'll need to use a liner system like Devilbiss Dekups.
Answered by: MikeL
Date published: 2014-12-18
  • 2015-04-01T09:58CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_51605, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Concours Paint Gun w/3 tips Plastic&Metal Cup

Item #51605 Brand: Eastwood

Requires only 4cfm @29psi!

Details

"High-End" Concours Paint Gun helps you spray-on a beautiful "collector-car" finish...yet it's powered by your home compressor with only 4 cfm @ 29 psi! There's no need to buy an expensive professional paint gun when Eastwood's full-size Concours HVLP spray gun has the same "high-end" features, but at 20% of the cost! And your home compressor provides all the air power you need (4 cfm @ 29 psi) to work with this Concours paint gun.
  • Includes 3 stainless steel needle/nozzle/air caps (1.2, 1.4 and 1.8mm)
  • Anodized adjustment knobs and air cap ring
  • Lightweight, satin-finished aluminum body
  • Compatible with most home-shop compressors
  • Backed by Eastwood's 10-year limited warranty

More info...

About Eastwood Concours Paint Gun w/3 tips Plastic&Metal Cup

This automotive paint kit includes the Eastwood Concours HVLP gravity-feed paint gun, which is an aluminum-bodied gun built for working comfort, reliability and years of service. With a working pressure of 29 psi and requiring only 4 cfm, this gun is ideal for the professional or hobbyist. The needle/nozzle and passages are stainless steel, making it compatible with both solvent and waterborne coatings. Includes tool kit and 1/4" NPT connection.


Contents

51550 Eastwood HVLP Gun with 1.2mm Cap/Needle/Nozzle for basecoats
51552 1.4mm Cap/Needle/Nozzle for clear coats
51553 1.8mm Cap/Needle/Nozzle for primers
51550B Teflon-Coated Aluminum Cup, 600cc
51550A Plastic Cup, 600cc
51136 Eastwood Paint Chip Chart


Accessories

29953 34-oz. DeKups® Disposable-Cup Starter Kit
51559 Digital Regulator
50207 DeKups Adapter
50040ZP Master Paint Kit
20474 4-Stage Air Dryer System
51537 Complete Garage Air Line System
10194ZP PRE Painting Prep 30 oz.
51561Z Liquid Ice Buffing System


Instructions

Download instructions in PDF format


Eastwood Concours Paint Gun


Introduction

Specifications:
  • 4 CFM @ 29 PSI max. working pressure at the air inlet, 10 PSI max. at the Air Cap
  • M16 x 1.5NPS cup attachment threads
  • 1⁄4" NPT Air Inlet threads

SET-UP:
  1. A 5/16" I.D. minimum air hose at a 25' maximum length is recommended for best results. A smaller I.D. hose and greater length may produce unsatisfactory results.
  2. Review complete instructions and become familiar with the "feel" of the gun.
  3. Clean out cup and gun with solvent to remove any residual manufacturing impurities and dry thoroughly.

Operation

Please note that many variables affect the adjustment of a paint gun such as paint viscosity and type, atmospheric conditions and operator preference. The following are some guidelines to get started but some time spent acquiring the "feel" of the gun and test spraying on sheets of masking paper are recommended before applying paint to your car. Always "tune" the gun before each use as conditions may not be the same as the previous use.

1. The "Fan" control knob (smaller blue knob at the top rear of gun) is opened by turning in a counter-clockwise direction. This controls the size of the spray pattern or "fan" and the droplet size. Out with the knob = larger pattern/larger droplet size, in = smaller pattern/smaller droplet size.
2. The "Fluid Needle" control knob (larger blue knob, below the fan control) is opened by turning in a counter-clockwise direction. This controls the amount of paint flow to the nozzle. Out with the knob = more paint,less atomization, in = less paint.
3. The "Air Valve" control knob (small blue knob at the bottom of the gun near the air inlet) is opened by turning in a counter-clockwise direction. This is a "fine tuning" for air flow in the gun. You generally want to start out fully open and decrease air as needed.
4. With practice you will quickly acquire a "feel" for the gun and will be producing professional results.

Maintenance and Cleaning

Note:

It is extremely important that the gun be disassembled and cleaned after every use!

1. Pour out then wipe out any remaining paint in the cup, fill the cup with water (for water borne paints) or solvent (for solvent based paints) and spray in a safe area until the spray is clear.
2. Remove the Cup.
3. Remove the Fluid Control Knob (lower blue knob at the rear of gun) fully by turning in a counter-clockwise direction.
4. Remove the spring with the fluid knob and pull the needle out from the rear of the gun.
5. Remove the Air Cap.
6. Remove the Nozzle by unthreading with the #13 hex in the included wrench.
7. Inspect the internal passages of the gun for any remaining traces of paint and using the included brush and water (for water borne paints) or solvent (for solvent based paints), clean out the passages and rinse.
8. Blow out any remaining water or solvent and reassemble the gun in the following order:
9. Thread the Nozzle into its bore and snug in place with the #13 hex of the included wrench.
10. Slide the needle back into place.
11. Slide the spring over the end of needle and thread the knob on.
12. Lastly, thread the Air Cap onto the end of the gun keeping the air horns in the horizontal plane.

Optional Accessories

1.2 Cap, Stainless Needle & Nozzle Set
1.4 Cap, Stainless Needle & Nozzle Set
1.8 Cap, Stainless Needle & Nozzle Set.
DeVillbiss DeKups Adapter
M16 x 1.5NPS 3M PPS Adapter
600cc Aluminum Cup for solvent based paints


Safety

Always wear eye, skin and respiratory protection. Follow tech data sheet and MSDS of the paint you are applying. Always follow paint manufacturer's safety information. Always paint in a well-ventilated area, away from open flame and sparks.


Customers also viewed: