• Home
  • Eastwood Concours HVLP Primer/Base Gun 1.2-1.8
Eastwood Concours HVLP Primer/Base Gun 1.2-1.8 is rated 4.8333 out of 5 by 6.
Rated 5 out of 5 by from Well made I'm new to painting and have yet to shoot anything, but I did some testing with water for practice. My medium sized Makita 6.5CFM compressor was able to keep up no problem. The spray was very uniform, and the controls allow for fine adjustments. The gun looks amazing and has a quality feel in the hand. Unlike some cheap guns I tried, the trigger has two positions. Air, then paint. This is critical for a gun to have. I'm very excited that Eastwood offers a hobby gun with low CFM requirements. The alternatives were an expensive huge compressor, or a dedicated lower grade turbine system.
Date published: 2015-01-10
Rated 5 out of 5 by from Concours Paint Gun Recieved gun very nice body Ive always shot with SATA guns, gun has very nice feel puts basecoat down very well with 1.2 tip , would not recommend shooting clear with 1.2 tip unless clear is thinned. Clear is just little to thick for tip. Other than that gun sprays very well. Very happy with purchase.
Date published: 2013-10-03
Rated 5 out of 5 by from Outstanding Gun for the Home Shop! I had a cheap gun before this and it would not keep up with my home 30 gallon compressor. It would also leave tiger stripes. I bought this gun from Eastwood and it did an outstanding job. My compreesor kept up. No tiger stripes! Fan patterns out great. For the home shop compressor this is the gun you need. Its even alot easier to clean than my previous gun. Thanks eastwood for making this!
Date published: 2012-05-06
Rated 5 out of 5 by from Excellent paint gun for first timers You guys do it again, your concours gun gave me the confidencs to paint my truck. I started with the primer it lade out so good that when I am ready to put the paint down I will do it too. Thanks!, you guys sell the PRO. products to the weekend warrior....
Date published: 2010-07-05
Rated 4 out of 5 by from Great gun for the hobby After looking at Devillbiss for months, and considering upgrading my compressor to accommodate their Finishline gun and 13 CFM, I was pleased to find the Concours by Eastwood. It is the ticket for the hobbyist, reasonably priced, 4 CFM, and has not failed to put down primer and paint beyond my expectation. Great product. I bought both the 1.2 and 1.8 caps, but have been considering buying another gun, just to separate primer from top coating.
Date published: 2013-10-06
Rated 5 out of 5 by from Works great I bought this gun to replace my sharpee finex. I must say this is great for spraying high build primers 3 in 1 primers and others, this also works great for base coat and clear coats.
Date published: 2015-02-15
  • 2015-05-04T08:53CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_51604, PRD, sort_relevancy
  • clientName_eastwood

Can this gun be used to spray water born coatings?

Asked by: Tyler1451
Yes, you can use it to spray waterborne or any other liquid paint materials.
Answered by: MikeL
Date published: 2015-02-18
  • 2015-05-04T09:41CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_51604, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Concours HVLP Primer/Base Gun 1.2-1.8

Item #51604 Brand: Eastwood

Affordable Concours: full-size HVLP gun and 2 tips


Concours Paint Gun with 2 tips sprays-on a "show-car" finish...yet it's powered by your home compressor with only 4 cfm @ 29 psi! No need to buy an expensive pro paint gun when Eastwood's full-size HVLP Concours Paint Gun has the same impressive features and 2 tips (1.2mm for base coats, 1.8mm for primers), all at a fraction of the cost. And your home compressor provides all the air power you'll need (4 cfm @ 29 psi) to work with this Concours paint gun.
  • Includes 2 stainless steel needle/nozzle/air caps (1.2mm and 1.8mm)
  • Anodized adjustment knobs and air cap ring
  • Lightweight, satin-finished aluminum body
  • Compatible with most home-shop compressors
  • Backed by Eastwood's 10-year limited warranty

More info...

About Eastwood Concours HVLP Primer/Base Gun 1.2-1.8

Eastwood Concours HVLP gravity-feed paint gun is an aluminum-bodied gun built for working comfort and reliability. With a working pressure of 29 psi and requiring only 4 cfm, this gun is ideal for the pro or hobbyist. Two needle/nozzles and passages are stainless steel, so they're compatible with both solvent and waterborne coatings. Includes tool kit and 1/4" NPT connection.


51550 Eastwood HVLP Gun with 1.2mm Cap/Needle/Nozzle for base coats
51553 1.8mm Cap/Needle/Nozzle for primers
51550B Teflon-Coated Aluminum Cup, 600cc
51550A Plastic Cup, 600cc
51136 Eastwood Paint Chip Chart


50207 DeKups Adapter
11549 PPS #2 Adapter
51551 1.2mm Needle/Nozzle/Air Cap
51552 1.4mm Needle/Nozzle/Air Cap
51553 1.8mm Needle/Nozzle/Air Cap
10041Z PRE Painting Prep
51550A Additional 600cc Plastic Cup
51550B Additional 600cc Aluminum Cup


Click here for product instructions


Always wear eye, skin and respiratory protection. Follow tech data sheet and MSDS of the paint you are applying. Always follow paint manufacturer's safety information. Always paint in a well-ventilated area, away from open flame and sparks.

Customers also viewed: