Home
Eastwood Contour Lightweight Body Filler .8 gal

Contour Lightweight Body Filler .8 gal (Eastwood)

Eastwood Contour Lightweight Body Filler .8 gal

Item #13519 ZP Brand: Eastwood

Non-clogging filler puts down
a smooth, pinhole-free surface

Details

Contour™ Lightweight Body Filler puts down a smooth, pinhole-free surface Non-clogging, lightweight body filler is formulated for smooth spreading and easy sanding. Provides superior adhesion to galvanized steel, aluminum and all metals, as well as wood, concrete and fiberglass.

Pinhole-free formula
Maximum adhesion
Includes 2-oz. hardener

About Eastwood Contour Lightweight Body Filler .8 gal

Creamy texture has excellent workability and virtually eliminates all pinholes. May be top-coated with your own glazing putty, or epoxy or urethane primer.

1 can of Lightweight Body Filler, 0.8-gallon
1 tube of Cream Hardener, 2 ozs.

13521ZP Contour™ Glazing Putty
13919 Eastwood Filler Spreaders
31273 Eastwood Filler Mixing Board
10041Z PRE Painting Prep
31160 Dura-Block Sanding Blocks
21538 Larry Lyles "Basic Body Repair" DVD
43579 Dual-Action Random-Orbit Sander
43120 Eastwood Fender Stand

Thoroughly mix desired amount of material with cream hardener. Using a clean spreader, fill to desired level. Do not exceed 1/4" depth. Allow to cure for at least 15 minutes before sanding. Abrade with 80-grit and follow up with 120-grit to achieve desired contour. Final finish with finer abrasives. If necessary, apply Eastwood’s 13521ZP Contour™ Glazing Putty for final finishing. Topcoat with quality primer, such as Eastwood’s Epoxy or Urethane Primers.

CAUTION: Do NOT return catalyzed material back into can. To avoid contamination, seal lid tightly after each use. Store in a cool dry place.

Always wear eye, skin and respiratory protection when using this product. Always apply in a well-ventilated area. Consult MSDS and product label for specific safety warnings.