- Eastwood Contour Lightweight Body Filler .8 gal
Eastwood Contour Lightweight Body Filler .8 gal
Item #13519ZP Brand: Eastwood
a smooth, pinhole-free surface
- Pinhole-free formula
- Maximum adhesion
- Includes 2-oz. hardener
About Eastwood Contour Lightweight Body Filler .8 gal
Eastwoodâ€™s Lightweight Body Filler is a non-clogging lightweight filler designed to provide smooth spreading and easy sanding. Its creamy texture has excellent workability and virtually eliminates all pinholes. It adheres to all metals and wood, concrete and fiberglass. Includes cream hardener.
Filler 102.4 oz /08 US gallon/ 3 liters
12416z Eastwood Guide Coat 10041Z PRE Painting Prep 13919 Eastwood Filler Spreaders 31273 Eastwood Filler Mixing Board 31160 Dura Block Sanding Boards 21538 Larry Lyles Body Work DVD 12776 Evolution HVLP Paint Gun 14064 2oz cream hardener
Thoroughly mix desired amount of material with cream hardener. Using a clean spreader, fill to desired level. Do not exceed 1/4" depth. Allow to cure for at least 15 minutes before sanding. Abrade with 80-grit and follow up with 120-grit to achieve desired contour. Final finish with finer abrasives. If necessary, apply Eastwood’s 13521ZP Contour™ Glazing Putty for final finishing. Topcoat with quality primer, such as Eastwood’s Epoxy or Urethane Primers.
CAUTION: Do NOT return catalyzed material back into can. To avoid contamination, seal lid tightly after each use. Store in a cool dry place.
Always wear eye, skin and resp[oratory protection when using this product always apply in a well ventilated area. consult MSDS and product label for specific safety warnings
Made in Canada to Eastwood's strict specifications and quality standards
Surface must be clean and free of wax, grease and debris. Abrade surface using 36 grit, or finer. Thoroughly mix desired amount of material with 2% cream hardener. Do not exceed 1/4" depth. Allow to cure 15 min before sanding. Abrade with 120-180 grit to desired contour. Use a finer abrasive to achieve finer finish If necessary, apply Eastwoodâ€™s Polyester Glazing Putty (13521zp) final finishing. Topcoat with quality primer such as Eastwoodâ€™s Epoxy or Urethane Primers. Do NOT return catalyzed material back into can.
Customers also viewed:
Save clean-up time, money: 100 tear- off mixing sheets on masonite boardOnly $18.99
Sands all types of flat and contoured surfaces; use wet or dry
Stronger-than-it-looks portable stand holds up to 500 lbs.!Only $29.99