Details

About Eastwood Contour Premium Body Filler .8 gal

Contour™ 1-step Premium Body Filler spreads smoothly and sands beautifully to eliminate pinholes, and the feather-edging properties won’t clog sandpaper. No glazing putties needed! May be top-coated with epoxy or urethane primer. Includes 2-oz. cream hardener.

1 can of Contour™ 1-step Premium Body Filler, 0.8-gallon
1 tube of Cream Hardener, 2 ozs.

13521ZP Contour™ Glazing Putty
13919 Eastwood Filler Spreaders
31273 Eastwood Filler Mixing Board
10041Z PRE Painting Prep
31160 Dura-Block Sanding Blocks
21538 Larry Lyles "Basic Body Repair" DVD
43579 Dual-Action Random-Orbit Sander
43120 Eastwood Fender Stand

Thoroughly mix desired amount of material with cream hardener. Using a clean spreader, fill to desired level. Do not exceed 1/4" depth. Allow to cure for at least 15 minutes before sanding. Abrade with 80-grit and follow up with 120-grit to achieve desired contour. Final finish with finer abrasives. If necessary, apply Eastwood’s 13521ZP Contour™ Glazing Putty for final finishing. Topcoat with quality primer, such as Eastwood’s Epoxy or Urethane Primers.

CAUTION: Do NOT return catalyzed material back into can. To avoid contamination, seal lid tightly after each use. Store in a cool dry place.

Always wear eye, skin and respiratory protection when using this product. Always apply in a well-ventilated area. Consult MSDS and product label for specific safety warnings.