- EW Cruise Night Blue Metallic 3:1 SS Urethane
EW Cruise Night Blue Metallic 3:1 SS Urethane
for exceptional long-lasting beauty
About EW Cruise Night Blue Metallic 3:1 SS Urethane
EW Cruise Night Blue is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator.
21856 ZP activator required. 50250 ZP Urethane Clear and 50251 ZP Activator 50240 ZP Urethane primer and 50241 ZP Activator 12817 Paint accessory kit, 19830 Respirator, 20406 coveralls 12454Z Block sanding kit, 20491 3-gun set 20472 Air management system
Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70Ã–. HVLP gun setting 8-10psi 1.4-1.8mm tip. This color is designed to give complete coverage in 3-4+ coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours.
Questions & Answers