- Eastwood Detail Gray Paint Aerosol 13 oz
Eastwood Detail Gray Paint Aerosol 13 oz
parts, and protect against rust
Restore the original color of metal parts—and protect them against rust—with Eastwood Detail Gray® Paint.
- Produce a professional, like-new OEM finish
- Protects parts against rust and corrosion
- Resist Temperatures up to 300 Degrees F
Get a factory-correct look with Detail Gray when you spray it on stamped or machined steel, pot metal and other die-cast parts.
About Eastwood Detail Gray Paint Aerosol 13 oz
This Detail Paint is specially formulated to duplicate the original look of die cast and stamped steel. Protected up to 300 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss.
Detail Gray, also available in Quarts (10046ZP)
Each 13 oz. aerosol can covers 6 Sq. ft, maximum temperature 300F.
To remove grease & oil use our Pre Paint Prep (10041 Z). For greater durability use our Self-Etching Primer (16014 Z) Aer. or (16009 ZP) Qt. on rust free areas. On rusty steel, use Eastwood Rust Encapsulator (16040 Z) Aerosol. Buy 3 or more, mix and match, and SAVE!
Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
Detail Gray, also available in Quarts (10046 ZP), is an acrylic lacquer that resembles stamped steel. Covers 6 sq ft. Max temp 300F. To remove grease and oil, use our PRE Painting Prep (10041 Z). Detail Gray can be used on bare metal, or for greater durability, use our Self Etching Primer (16014 Z) Aer. or (16009 ZP) Quartt on rust free areas. On rusty metal, use Eastwood Rust Encapsulator (16040 Z) Aer., (16043 Z) Pint, or (16045 ZP) Qt. Use in a well ventilated area, or use a respirator like our SAS Bandit (11455 or 11456).
Questions & Answers
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesion