• Home
  • Eastwood Diamond Clear Gloss/Metal Surfaces
    Eastwood Diamond Clear Gloss/Metal Surfaces is rated 4.0 out of 5 by 12.
    Rated 5 out of 5 by from Eliminates polishing billet I was looking for a way to keep from polishing my Zoop's billet brackets without the extra cost of chrome plating. I hate polishing billet aluminum. I bought this as an experiment. I cleaned the billet with prep solvent and sprayed on two light coats. I was amazed, the stuff dries super fast. You can't tell that there is even a clear coat on the billet. All my friends think that I had the brackets chrome plated. Absolutely amazing. I purchased all the other Eastwood clears. Great products!!!!!
    Date published: 2011-02-25
    Rated 3 out of 5 by from It's OK Prepped polished part as per instructions. Disappointed in finish after spraying. Was a satin finish. Disappointed because not able to protect a polished surface the way I wanted. I was using the spray on aluminum valve covers.
    Date published: 2013-05-28
    Rated 4 out of 5 by from Not for bare aluminum bike covers Tried to use on Suzuki GT550 engine covers after polishing. Parts cleaned as per instructions. Coating went on with a satin finish, not high gloss. After drying for more than a day, the fiinish flaked off, which worked out not too badly, since removal wasn't too difficult. Solution has been to re-polish and just use some good wax. Product was very disappointing. I use duplicolor laquers all the time, so am not new to rattle can paints. Very disappointing.
    Date published: 2012-05-01
    Rated 5 out of 5 by from Worked Great! I repair and polish automotive trim, stainless and aluminum. I use the Diamond Clear Gloss on the aluminum trim, I've done several pieces and have been very pleased with the results. I strip the anodizing, repair and polish the trim, clean with wax and grease remover, tack and spray following the directions, when dry it looks close to the original anodized finish.Very pleased with the product..
    Date published: 2013-08-21
    Rated 5 out of 5 by from Works Great! repair and polish automotive trim, stainless and aluminum. I use the Diamond Clear Gloss on the aluminum trim, I've done several pieces and have been very pleased with the results. I strip the anodizing, repair and polish the trim, clean with wax and grease remover, tack and spray following the directions, when dry it looks close to the original anodized finish.Very pleased with the product..
    Date published: 2013-08-21
    Rated 4 out of 5 by from Use it Right I feel that the those who are having problems,are not using it right,I build snowmobile suspensions,and use it on the railsand other small parts with decent results,I belive you need the aluminum to slightly oxidize some after polishing,then you can get the results you are looking for.
    Date published: 2014-01-17
    Rated 4 out of 5 by from great product this stuff is great, I purchased a new gas tank for my 68 RS/SS Camaro and wanted to keep the nature zink finish but didn`t want to paint it a color. This product was exactly what I was looking for, left me a great finish and protection without losing the natural finish of my gas tank.
    Date published: 2013-02-05
    Rated 4 out of 5 by from Works very well This clearcoat finish is much more effective than any over-the-counter products that I have tried. It dries very hard, and is excellent at resisting yellowing and staining. More expensive but worth it if you want the finish to last.
    Date published: 2013-10-15
    • 2015-04-20T09:32CST
    • bvseo_cps, prod_bvrr, vn_cps_3.1.1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_12
    • loc_en_US, sid_10200Z, PRD, sort_relevancy
    • clientName_eastwood

    I keep hearing that there is no way to clear coat polished steel and keep it from rusting is that true.

    Asked by: mcdab
    We have a product called Exo Armour which is a true clear for bare metal and will not cause any sort of corrosion underneath
    Answered by: SeanA
    Date published: 2015-01-08

    does diamond clear have uv block? if not which product do you recommend for protecting bare, unpainted car body(bare metal, no rust). Thanks

    Asked by: mrLee
    For clean bare metal overall i would use the 2K aero clear over the diamond clear. The diamond clear is UV resistant though
    Answered by: SeanA
    Date published: 2014-11-17

    Can you use this on a bushed steel motorcycle gas tank? 

    Asked by: Jonf1997

    My wheels are polished aluminum and painted can this product be used on the whole wheel?

    Asked by: Tattootom
    • 2015-04-20T10:34CST
    • bvseo_cps, prod_bvqa, vn_cps_3.1.1
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_4
    • loc_en_US, sid_10200Z, PRD, sort_recentAnswersFirst
    • clientName_eastwood

    Eastwood Diamond Clear Gloss/Metal Surfaces

    Item #10200Z

    Tough, flexible, crystal clear
    barrier keeps metal looking bright

    Details

    Diamond Clear™ for Bare Metal coats metal parts with a crystal clear barrier that keeps metal looking bright Your vehicle's brass, aluminum, steel, die-cast, even cast iron parts can look their absolute best when you spray-on this clear, tough, flexible, Diamond Clear™ coating.
    • Resists chips, cracks, fading and yellowing
    • Spray on polished wheels, aluminum valve covers, underhood parts
    • Fuel-resistant; heat-resistant to 300 degreesF

    More info...

    About Eastwood Diamond Clear Gloss/Metal Surfaces

    Protect metal parts with a crystal clear, tough, flexible coating that keeps brass, aluminum, steel, die-cast, even cast iron looking great. This self- leveling formulation, resists chips, cracks, fading and yellowing. May slightly dull reflectivity. Resists fuels and temps up to 300 degrees. Ideal in underhood applications except exhaust manifolds. Great for polished wheels, aluminum valve covers as well as items around the shop and home. Diamond Clear for Bare Metal is a solvent-based clear in a 11 oz aerosol can. Assure surface is grease and oil free with PRE Painting Prep (10041Z).


    Contents

    Includes 11 oz net weight.


    Instructions

    Click here for product instructions


    Warranty

    Made in the USA. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


    Application

    Diamond Clear for Bare Metal imparts a fuel resistant heat resistant (300 degrees F) barrier to clean metal surfaces. Clean surfaces to be coated with PRE Painting Prep (10041Z) or Metal Wash (10120)to make sure no grease or oil remains. Applies best at 70 degrees F or warmer with 50% or less humidity. Thoroughly cures in 24 hours at 70 degrees F 50% or less humidity. One can covers about 6 square feet. For best apply only one full flowing coat.


    Customers also viewed: