- Eastwood Diamond Clear Gloss/ Painted Surface 11oz Aerosol
Eastwood Diamond Clear Gloss/ Painted Surface 11oz Aerosol
Item #10196Z Brand: Eastwood
and adds a high-gloss finish
Diamond Clear™ for Painted Surfaces protects newly painted wheels and adds a high-gloss finish
- Ideal as a clear coat over Rally Wheel Silver Paint(10001Z)
- 90%+ gloss
- Resists chips, cracks, fading
- Withstands up to 300 degreesF
Use this Diamond Clear™ formula as a top coat for most cured painted surfaces like metallic, lacquers and enamels.
About Eastwood Diamond Clear Gloss/ Painted Surface 11oz Aerosol
Protect Your Newly Painted Wheels. Delivers added protection against rust, corrosion and chemicals while providing a high-gloss finish that will add a clear-coat depth to your wheels. This formula resists fading, chipping, and cracking. Ideal as a clear coat over Rally Wheel Silver paint. Compatible with most cured lacquer and enamel paints. One can covers 6 sq. ft. or 2 to 4 wheels. 90+% gloss, Polyurethane, Max temp 300 degrees F. Buy 3 or more and Save! May slightly dull polished metal surfaces.
One aerosol 11 oz net weight.
Only apply to cured surfaces.
Made in the USA. 30 Day Eastwood Warranty.
This clear works well over thoroughly cured lacquer, enamel and unusual finishes like our trunk paints. Dries to the touch in 5-10 minutes at 50% humidity 77 degrees F. Fully cured in 48 hours at 77 degrees F at 50% humidity. 90+% Gloss. Can be recoated at any time at 77 degrees or warmer, 50% or less humidity. Note: Dry times can vary considerably depending on the substrate being sprayed. The slowest dry time was found to be when sprayed on non-porous, non-treated hardwood, which can take up to 90 minutes to be tack free. Pencil hardness after 48 hour cure @77 degrees F is 6H to 8H.
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesion