- Dimpling Pliers
- 10" locking pliers with dimpling head
- "Pilot" self-centers the dimple
About Dimpling Pliers
Dimpling feature is fitted onto 10" locking pliers for easy operation.
Simply line up your steel or aluminum patch panel over the repair area, and drill a series of 1/8" holes, spaced about 1" apart, through both panels. Remove the patch panel, dimple at each drilled hole, and do the same on the panel being repaired. The special "pilot" self-centers the dimple. Rivet the panel in place, cover the seam with a thin coat of filler, then finish.