- Extreme Chassis Black Satin 14 Ounce Aerosol
I want to apply a coat of "Extreme Chassis Black" over 2 coats of POR-15. Can the "Extreme Chassis Black" be applied while the POR-15 is tacky, like the POR-15 second coat, or does the POR-15 need to cure fully?
Should you apply a clear coat over the chassis paint? In my case I have a rail buggy and want the most durable option.
Extreme Chassis Black Satin 14 Ounce Aerosol
- Improved resistance against corrosion, chips and scratches
- Resists brake fluid, fuel and solvents
- Matches OEM finish
- Apply multiple coats without lifting
- 14-oz. can provides about 8 sq. ft. of coverage
About Extreme Chassis Black Satin 14 Ounce Aerosol
You spent many hours prepping your frame; now paint it with the best Chassis Black formulation available. Up to 3X more durable than Original Chassis Black. This maximum durability formulation offers improved brake fluid, fuel, solvent, chip and scratch resistance. For improved adhesion prime clean bare metal with Extreme Chassis Black Primer aerosol (11193Z), qt. (11194ZP), or gal. (11195ZP). Prime Rusty Metal with Eastwood Rust Encapsulator. Allow 15-20 minutes between vehicle undercoating with Extreme Chassis Black. Can be recoated at any time without lifting.
10041Z PRE Paint Prep 51111Z Suspension Detailing Kit 50457ZP Spray Gray Stainless Epoxy Coating 50458 ZP Detail Gray Stainless Epoxy Coating 10331Z Golden Cad System 10426z Underhood detailing kit 10395z Factory gray High Temp exhast manifold coating 10020z Silver exhaust system paint
Always wear eye, skin and respiratory protection when painting. Follow label directions and consult MSDS for specific warnings
Use on suspension compnents, frames, floors and other undercar compnents
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $9.99
Epoxy-fortified primer promotes better adhesion and durabilityOnly $14.99
Get down to bare metal fast with 3M's cleaning and stripping discsOnly $34.99