• Home
  • Factory Gray Hi-Temp Coating 11.75oz aerosol
Factory Gray Hi-Temp Coating 11.75oz aerosol is rated 4.6667 out of 5 by 3.
Rated 5 out of 5 by from A must for any engine swap! I picked up a can of this product a few years back for some exhaust manifolds for a 68 Pontiac. Years later the manifolds still look great! You put all that work into a new engine, don't just put the old manifolds back on there without this coating. Bare manifolds will oxidize over time and give you an eyesore in the engine compartment. Be sure to beadblast the manifolds before prep! Thanks Eastwood!
Date published: 2011-01-29
Rated 5 out of 5 by from Great coating for your exhaust manifold Spray went on easy and adds a really nice look to my cast iron exhaust manifold. Really dresses up the engine! Highly recommended.
Date published: 2010-01-26
Rated 4 out of 5 by from Great manifold coating Goes on easy but could be a little darker and cheaper. Other than that it is a very good coating. Very pleased and will recommend.
Date published: 2010-02-23
  • 2015-02-27T10:09CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_10395Z, PRD, sort_relevancy
  • clientName_eastwood

Factory Gray Hi-Temp Coating 11.75oz aerosol

Item #10395Z

Replicate the look of cast iron on
manifolds, headers; protects to 1200°F

Details

Factory Gray High-Temp Coating sprays the look of cast iron on manifolds and headers When you need to match the original cast iron look of manifolds and headers, our convenient Factory Gray High-Temp Coating Aerosol is your ideal choice for durability and good looks. Uses your engine's heat to cure.
  • Just spray-on
  • Stable up to 1,200 degreesF

Click Here For Tech Tips

Do you have a product idea? Click Here to suggest it!

More info...

About Factory Gray Hi-Temp Coating 11.75oz aerosol

Now the same great 1200 degree performance of our original High Temp Manifold Coating is available in convenient aerosol packaging. Each can is sufficient to coat 2 standard cast iron manifolds or about 6 square feet. 2 cans recommended for header systems.


Contents

11.75-oz. aerosol can of Factory Gray High-Temp Coating


Accessories

10132Z Exhaust Detailing Kit
10020Z Aluminum Exhaust System Paint


MSDS Sheet

Click Here for Material Safety Data Sheet


Safety

Contains Toluene 108-88-33 1, 1, 1, 2-Tectraflourethene (HFC-134A) 811-97-2, Stoddard Solvent 8052-41-3,Aluminum Flake 7429-90-5,Mineral Spirits 64742-88-7, Phenylpropyl Silsesquioxanes 68037-90-1,Toluene 108-88-3,Carbon Black1333-86-4. Keep away from heat, sparks & open flame. Use with adequate venting. Vapor is harmful. Harmful or fatal if swallowed. If swallowed, do not induce vomiting. Call a physician immediately.Avoid prolonged skin contact & breathing of vapor mist.Warning: This product contains a chemical known to the State of California to cause birth defects and other reproductive harm.


Customers also viewed: