- EW Fast Etch with pump 32 oz
EW Fast Etch with pump 32 oz
About EW Fast Etch with pump 32 oz
This specially formulated rust remover is a powerful, rust-fighting liquid created to meet the needs of auto restorers. It reaches even inaccessible areas, quickly dissolving iron oxide completely and leaving a zinc phosphate coating. Fast Etch can be sprayed, brushed, or used as a parts dip. It is non-toxic, non-flammable and reusable. This is not a primer. Treated surfaces should be wiped with PRE Painting Prep (10041 Z) or thinner before priming and painting.
PRE Self Etching primer
There is a minimal risk of Hydrogen embrittlement when using this rust remover. Bake de-rusted parts at 400 degrees F. for 3 hours if the minimal amount of hydrogen embrittlement is a concern. This rust remover works as a great alternative to abrasive blasting for rust removal.
always use in a well ventilated area. Consult MSDS for specific safety warnings
MADE IN THE USA
Eastwood Fast Etch is a Phosphoric acid solution that leaves behind a corrosion resistant coating. Removes rust in seconds to several hrs. depending on temp. and severity of rust. One pt. treats about 20 sq ft. Our rust remover works faster at 90 deg F than at 70 deg F. Fast Etch does not remove paint but may cause discoloring. Remove loose rust & degrease surface with PRE Painting Prep (10041 Z) before using rust remover. After removing rust, wipe down part with PRE Painting Prep (10041 Z) and top coat with Self Etching Primer
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $6.99