• Home
  • Eastwood Gasser Green Metallic 3:1 Urethane Enamel 96oz

Eastwood Gasser Green Metallic 3:1 Urethane Enamel 96oz

Item #50221ZP

Premium acrylic urethane topcoat
for exceptional long-lasting beauty

Details

Eastwood's Gasser Green is a premium acrylic urethane paint with exceptional beauty & durability. Made from top-quality raw materials and advanced composition technology. Superior to acrylic, alkyd & lacquer coatings. Offers unsurpassed durability & resistance to UV, chemicals and stone chips. 96 Fl. Oz 3:1 Single stage Topcoat system requires 21856ZP activator. This heavy metallic finish works best when shot at about twice the normal gun to surface distance. This "dry-spray" technique uniformly orients the metallic flake. Use Eastwood Urethane Clear 50250ZP to seal and provide a professional depth and shine.

More info...

About Eastwood Gasser Green Metallic 3:1 Urethane Enamel 96oz

EW Gasser Green is a premium acrylic urethane paint with exceptional beauty & durability. Made from top-quality raw materials and advanced composition technology. Superior to acrylic, alkyd & lacquer coatings. Offers unsurpassed durability & resistance to UV, chemicals and stone chips. 96 Fl. Oz 3:1 Single stage Topcoat system requires 21856ZP activator. This heavy metallic finish works best when shot at about twice the normal gun to surface distance. This "dry-spray" technique uniformly orients the metallic flake. Use Eastwood Urethane Clear 50250 ZP to seal and provide a professional depth and shine.


Accessories

21856 ZP activator required. 50250 ZP Urethane Clear and 50251 ZP Activator 50240 ZP Urethane primer and 50241 ZP Activator 12817 Paint accessory kit, 19830 Respirator, 20406 coveralls 12454Z Block sanding kit, 20491 3-gun set 20472 Air managemnet system


Application

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70ø. HVLP gun setting 8-10psi 1.4-1.8mm tip. This color is designed to give complete coverage in 3-4+ coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours.


MSDS Sheet

Click Here for Material Safety Data Sheet


Application

Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70Ö. HVLP gun setting 8-10psi 1.4-1.8mm tip. This color is designed to give complete coverage in 3-4+ coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours.


Customers also viewed: