• Home
  • Eastwood Gel Rust Dissolver Quart
    Eastwood Gel Rust Dissolver Quart is rated 3.3636 out of 5 by 11.
    Rated 5 out of 5 by from great stuff took the rust off my trunk lid- save me a lot of time not having to sand and grind.
    Date published: 2010-09-18
    Rated 5 out of 5 by from Brand new casting Be patient; works great, manifolds with 178k looked freshly cast.
    Date published: 2014-03-12
    Rated 5 out of 5 by from Excellent Product and works as advertised! I have to say I was apprehensive on ordering this product because everything I have ever purchased for rust removal was a complete joke. But I knew Eastwood was great with everything they sell and the alternative to replacing the pipes on my motorcycle restoration project was going to astronomical-so I gave tthe gel a shot. I did as directed, wired brushed all the heavy rust off and used a chip brush to coat the pipes still installed on the bike. I used plastic shopping bags and wrapped the pipes loosley and gave them the overnight soaking. I unwrapped them the nect morning and all the rust was gone- not some of it, or partially removed but COMPLETELY removed!!!! I washes them off, applied a few coats of metal polish and they look amazing- I will also add that these pipes coming out of then engine looked absolutely terrible. Just sold brown corroded rusty exaust pipes. This Gel is worth every penny and saved me so much money I am still amazed evry time I look at them. I have the spokes to do on both wheels and have no worries about the rest of the project. A little of this goes along way and I used plenty. I am regretting not taking a before and after pic to post, but I will with the wheels. Order this product with no worries about performance- it works!
    Date published: 2011-04-15
    • 2015-04-20T10:09CST
    • bvseo_cps, prod_bvrr, vn_cps_3.1.1
    • cp_2, bvpage2n
    • co_hasreviews, tv_0, tr_11
    • loc_en_US, sid_12096, PRD, sort_relevancy
    • clientName_eastwood

    Eastwood Gel Rust Dissolver Quart

    Item #12096

    Sticky gel is ideal for roofs, deck lids, hoods, frame rails and more


    Gel Rust Dissolver adheres to large surfaces to dissolve rust...no need to submerge the metal Eastwood's Gel Rust Dissolver harnesses the powerful rust-dissolving properties of our popular liquid rust dissolver and puts them into a sticky gel, so no submersing is needed!
    • Ideal for roofs, deck lids, hoods, frame rails and more
    • Just wire-brush off loose rust and scale, then apply gel with a brush
    • Penetrates deep into the metal, dissolving rust in just a few hours
    • 1-quart bottle

    More info...

    About Eastwood Gel Rust Dissolver Quart

    Tacky gel sticks to large surfaces and dissolves rust without having to submerse the metal in a tub or bucket, so it's perfect for roofs, deck lids, hoods, frame rails and more. Easy to use: simply wire-brush off the loose rust and scale, then apply gel with a brush; penetrates deep into the metal to dissolve the rust overnight. (Can also be submerged, if desired.) If you're going to top-coat the surface, first use our 10041Z PRE Painting Prep to remove any residual dissolver.

    So gentle, you can use it on engine parts; harmless to copper, brass, aluminum, solder, lead, plastic, rubber, wood and vinyl.


    1-quart bottle


    10041Z PRE Painting Prep
    Nitrile Disposable Gloves
    43090 Safety Goggles


    Remove loose rust and scale using a wire brush. Apply Gel Rust Diss. using a brush or cloth rag. Apply generously, covering all areas. Using common plastic food wrap, lightly cover the area as to avoid evaportaion of the rust dissolver. DO NOT put plastic tightly over surface. Let rust dissolver set for at least 8 hours. Uncover and use a putty knife to scrap off gel. Wash off remaining gel with water. Best results at room temperature If you are going to paint surface, use Eastwood's PRE 10041z to remove any residual dissolver.


    Always wear eye, skin and respiratory protection. Use in a well-ventilated area. Consult MSDS for specific safety precautions. Make sure cap is tight before storing product.

    MSDS Sheet

    Click Here for Material Safety Data Sheet