• Home
  • Grinders Grease
Grinders Grease is rated 3.75 out of 5 by 4.
Rated 4 out of 5 by from Works Great At first I wasn't sure if this product could actually do what it claims. I first tried it with my double cut carbide burrs and found that it produced a smoother/faster cut with less chip scatter. Next I tried it with my porting kit and found the results to be far superior than could even be acheived with finer grit rolls. I also noticed that my tools stay sharper, cleaner and last longer than without Grinders Grease. I most of all like the fact that it doesn't take much to do the job from start to finish.
Date published: 2011-12-25
Rated 4 out of 5 by from Great for porting Keeps your fine cut carbide cutters from getting packed with metal shavings, especially when working with aluminum. Works a lot better than the older style wax that I've used for years.
Date published: 2013-05-23
Rated 5 out of 5 by from Much nicer results! I ported & polished my 4.6 DOHC heads, and before using this product, I had to mess with loaded burrs and I burned thru the cones & drums for finishing. This grease made all the difference. No loaded burrs and it gave me a nice finish, without scorch marks or dry scratches.
Date published: 2014-11-10
Rated 2 out of 5 by from Does what is sold to do. Save your money, a bar of soap or paraffin candle does the same task. I guess this would be better received and rated by an anal retentive yuppie. Unfortunately, I'm not either.
Date published: 2014-06-01
  • 2015-03-02T11:05CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_13119, PRD, sort_relevancy
  • clientName_eastwood

Grinders Grease

Item #13119 Brand: Eastwood

Grinders Grease

Details

Abrasive cartridge rolls and carbide bits often load up, reducing their cutting ability. This all-natural lubricant keeps your cutting tools clean for fastest work. A must for cutting aluminum and other soft metals; 8 oz. tube. NOTE: The Grinder's Grease is supplied in a semi-hard state. The friction of spinning buff, felt or burr melts a small amount onto the abrasive.

One year hassle free warranty.

More info...

About Grinders Grease

Abrasive cartridge rolls and carbide bits often load up, reducing their cutting ability. This all-natural lubricant keeps your cutting tools clean for fastest work. A must for cutting aluminum and other soft metals; 8 oz. tube. NOTE: The Grinder's Grease is supplied in a semi-hard state. The friction of spinning buff, felt or burr melts a small amount onto the abrasive.


MSDS Sheet

Click Here for Material Safety Data Sheet


Customers also viewed: