• Home
  • Eastwood Hi-Temp Internal Exhaust Coating w/extension tube

    Eastwood Hi-Temp Internal Exhaust Coating w/extension tube

    Item #13795Z Brand: Eastwood

    Reduces underhood temps; extends
    life of exhaust system components

    Details

    High-Temp. Internal Exhaust Coating reduces underhood temperatures and extends the life of exhaust system components Use our exclusive formula to coat the inside of exhaust system components to trap the heat inside the tubing, thereby lowering underhood and under car temperatures. Great for headers, exhaust manifolds and more!
    • Thermal coating withstands up to 1800 degrees F
    • 2'-long, 360-degree aerosol extension nozzle for easy application
    • Works with both new and used exhaust system components

    More info...

    About Eastwood Hi-Temp Internal Exhaust Coating w/extension tube

    Eastwood's High Temperature Internal Exhaust Coating is a truly unique product in that it is designed to reduce underhood temperatures and extend the life of exhaust system components. By coating the inside of exhaust system components, this focused formula traps the heat inside the tubing, thus lowering underhood & undercar temperatures. Its 1800° thermal coating properties will extend the life exhaust system components by preventing rust and corrosion build up from the inside out. And the Eastwood exclusive 2' 360° aerosol extension nozzle makes applying the coating a snap. Works with both new and used exhaust system


    Contents

    net weight 11 ounces 24" aerosol extension nozzle


    Accessories

    10041z PRE Painting Prep 11949z Low VOC PRE Painting Prep 12096/12097 Gel Rust Dissolver 10395Z Factory Gray External Exhaust Coating 10394Z Stainless Steel External Exhaust Coating 10396Z Silver Matte External Exhaust Coating 10393Z Black Matte External Exhaust Coating 10020z Silver External Exhaust Paint


    FAQ’s

    Q: can I use the Internal Exhaust Coating on the outside of my exhaust? A: yes, it is a Silver Matte finish and will withstand up to 1800°F Q: What if my header is used, how do I get the Rust out? A: Use Eastwood's Gel Rust Dissolver 12096/12097


    Safety

    Always wear eye, skin and respiratory protection when painting. Consult MSDS for specific safety warnings and precautions Always use in a well ventilated are away from open flames keep out of reach of children


    Warranty

    Standard Eastwood 90 day defect warranty MADE IN THE USA


    Application

    To apply, ensure the component to be coated is clean and free of rust and debris. If coating a used see additional instructions. Attach the 2' extension nozzle to the aerosol outlet. Insert extension tube in as far in as it can go. Depress button and slowly pull the extension tube out of the exhaust component. Inspect to make sure there is full coverage, only one complete coat is needed. Allow 8-12 hours to fully cure before putting into service.


    Customers also viewed: