• Home
  • Eastwood Hugger Orange Low-VOC Basecoat/Activator Kit

Eastwood Hugger Orange Low-VOC Basecoat/Activator Kit

Item #50071ZP Brand: Eastwood

Ease of conventional basecoat...durability of more modern urethane

Details

Eastwood's innovative Low-VOC Urethane Basecoat Paint System combines the ease of use of conventional basecoats with the superior durability and unmatched performance of more modern urethanes. And because it's a Low-VOC system, it meets regulatory limits in highly-regulated areas, eliminating the need to switch to a waterborne system. If you combine the basecoat system with our new finish to any car, anywhere in the continental U.S. Mixes 4:1 with Eastwood's Low-VOC Urethane Activator (Medium). Low-VOC (Less than 3.5 pounds per gal)

About Eastwood Hugger Orange Low-VOC Basecoat/Activator Kit

Eastwood’s innovative Low VOC Urethane Basecoat Paint System combines the ease of use of conventional basecoats with the superior durability and unmatched performance of more modern urethanes. And because it’s a Low VOC system, it meets regulatory limits in highly-regulated areas, eliminating the need to switch to a waterborne system. If you combine the basecoat system with our new finish to any car, anywhere in the continental U.S. Mixes 4:1 with Eastwood’s Low-VOC Urethane Activator (Medium). Low-VOC (Less than 3.5 pounds per gal)


Contents

One US Gallon of paint, 128 Fl. Oz One US Quart of medium activator, 32 Fl oz.


Accessories

51550 Concours HVP Paint Gun 10194ZP PRE Painting Prep 20474 4-stage air drying system 50307ZP Low VOC Clear 50300ZP Low VOC Urethane Primer 11455/11456 respirator 51559 Digital regulator 51561Z Norton Liquid Ice Buff System


Safety

Always wear eye, skin and respiratory protection. Always paint in a well ventilated area. Consult MSDS and Tech Data sheets for proper safety precautions VOC= 3.5 lbs.gallon


Warranty

Made in USA NSN # - None


Application

Prep surface and remove all traces of contaminants. Use Eastwood's PRE Prep. Sand existing finish with 400-600 grit abrasive. Reclean surface. Mix 4:1 with activator. Reduction not necessary. Shake Well HVLP Gun Nozzle Size 1.2mm-1.4mm. Apply in 2 medium wet coats with 50% over lap. Allow 10 minutes flash time between each coat. Clear coat can be applied after 20-30 minutes. Maximum recoat time is 18 hours. Otherwise surface must abraded with 400-600 grit. Use 50307ZP Low VOC Clear & Activator Pot life is about 2 hours at 70°F