• Home
  • Eastwood Gel Paint and Powder Stripper Gal.
Eastwood Gel Paint and Powder Stripper Gal. is rated 1.6 out of 5 by 5.
Rated 1 out of 5 by from Unacceptable results I purchased this product specifically to remove powder coat from two parts that did not turn out to my satisfaction. Per the video on the website I expected the same results. This product did not work any better than the paint stripper I purchased from my local home center at less than half the price. I already paid too much for this product, otherwise I would ship it back. I use other Eastwood products with good results, but in my opinion, this one is a dud.
Date published: 2013-03-20
Rated 4 out of 5 by from Works fairly well This stripper works very quickly, but one layer at a time. When reapplying the stripper, the deeper layers will become soft and can be scraped. As the instructions suggest, the stripper works best when it is kept moist by applying more as needed.. The instructions say that a plastic scraper is adequate. This is true for the first layer, but deeper layers must be scraped with a razor scraper. I took off any residual paint with lacquer thinner and steel wool. No stripper is a miracle. This works OK.
Date published: 2013-02-17
Rated 1 out of 5 by from Unacceptable I bought this product to remove powder coating from a part that did not turn out to my liking. Unlike in the video, it did not remove the powder coated piece any better than the stripper I bought at the local home center.Which by the way, was not very good either on the powder coat, but, I expected a better product from Eastwood at three times the price. In my opinion, this product did not perform as advertised.
Date published: 2013-03-21
Rated 1 out of 5 by from Unacceptable I bought this product to remove powder coating from a part that did not turn out to my liking. Unlike in the video, it did not remove the powder coated piece any better than the stripper I bought at the local home center.Which by the way, was not very good either on the powder coat, but, I expected a better product from Eastwood at three times the price. In my opinion, this product did not perform as advertised.
Date published: 2013-03-21
Rated 1 out of 5 by from Eastwood,where is my gel stripper?? Hello. I ordered one gallon of Gel Paint&Powder Stripper more then two weeks ago and still don't receive it. But its ok......I have all winter to finish my project.
Date published: 2014-11-13
  • 2015-03-01T08:49CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_12725ZP, PRD, sort_relevancy
  • clientName_eastwood

Eastwood Gel Paint and Powder Stripper Gal.

Item #12725ZP

Softens paint, powder coatings for easy scrape-off

Details

Brush-on Stripper softens paint and powder coatings for easy scrape-off Eastwood's Paint and Powder Stripper easily and effectively removes most stubborn paints and powders. Simply apply the stripper to the surface and let its aggressive stripping action go to work; a few minutes later use a putty knife to easily remove the paint or powder.
  • Works on most metals and plastics
  • Also available as a 1-qt. brush-on or 13-oz. aerosol

More info...

About Eastwood Gel Paint and Powder Stripper Gal.

Eastwood's Paint & Powder stripper easily and effectively removes most stubborn paints and powders. Simply apply the stripper to the surface and let its aggressive stripping action go to work and in a few minutes the paint or powder will easily remove with a putty knife.


Contents

128 oz 1 gallon usa


Accessories

10041z PRE painting Prep 19415zp Fast Etch Quart 16014z Self Etching Primer Aerosol 50240zp Urethane 2K Primer Gallon 12561z Sanding block kit 31160 Sanding Block Kit Pig Mat absorbent mats


Application

Remove any loose paint or powder before applying. Apply stripper liberally to painted or powder-coated surface. Formula will attack coating immediately. After a few minutes of de-laminating, use a putty knife or similar tool to remove coating. Do not let the stripper dry, since the coating will also dry and reapplication will be necessary. After coating is removed, neutralize with water and dry with a clean cloth. WARNING: this stripper will damage painted surfaces, such as floors and countertops. Clean up quickly with water.


Safety

always use in a well ventilated area keep away from children keep away from open flame consult MSDS for specific safety warnings


Application

Remove any loose paint or powder before applying. Apply stripper liberally to painted or powder coated surface. Formula will attack coating immediately After a few minutes of delaminating, use a putty knife or similar tool and remove coating. Do not let the stripper dry, as the coating will also dry and reapplication will be necessary. After coating is removed, neutralize with water and dry with a clean cloth. WARNING: this stripper will damage painted surfaces, such as floors and counter tops. Clean up quickly with water.


Customers also viewed: