• Home
  • Eastwood Panel Flanger
Eastwood Panel Flanger is rated 3.7 out of 5 by 6.
Rated 4 out of 5 by from Satisfactory results for Price The device does give satisfactory results, however it doesn't look like the the picture shown. Making a flange in multiple steps doesn't result in perfect alignment and bends, but I am still using it and will continue to use it. One improvement would be to make it with a longer handled vise grip so it wouldn't be so hard to set and release. I just flanged a floor pan edge about 5 feet long. Releasing the grip became tiresome. Overall I shouldn't complain. If you want something a little easier to use, you should purchase the air operated flanger.
Date published: 2010-01-09
Rated 3 out of 5 by from Little Disappointed The description says "makes neat and precise offset". After repeated practice the offset is anything but neat or precise and certainly doesn't look like the picture. The offset angle is not agressive enough in my personal opinion. I expected it to be closer to 90 degrees but it seems less than 45 degrees which leaves a bigger gap than I'd prefer to fill in with weld. Having said that, it is functional enough so I'll keep it. I felt the ad exaggerated the tools performance which lead to my disappointment.
Date published: 2011-04-06
Rated 4 out of 5 by from A Good Start Tool does a nice job (I was working with 18 ga. metal). I read the reviews before I purchased, so I wasn't surprised by not getting the precise bend as shown in the pictures. It bent the metal easily and if you mark the bend line before you start, you can line up the jaws and stay relatively straight.
Date published: 2011-04-20
Rated 1 out of 5 by from Difficult to use Should have designed with larger visegrips. does not produce a sharp bend, long panels are difficult to crimp a straight flange
Date published: 2012-10-09
Rated 5 out of 5 by from Nice tool I have bin looking for this tool for a long time now that I have it can't wait to use it thanks
Date published: 2016-08-14
Rated 5 out of 5 by from GOOD QUALITY Very so;id tool. good value for the price.
Date published: 2014-08-06
  • y_2017, m_2, d_25, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_31092, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Panel Flanger

Item #31092 Brand: Eastwood

Creates straight or curved
flanges 5/8" x 5/8" wide


Adjustable Locking Flanger helps you repair flush panels easily.

  • Creates straight or curved flanges 5/8" x 5/8" wide
  • Strong cam-action jaws
  • Fits into hard-to-reach areas

Eastwood's Adjustable Locking Panel Flanger produces a step deep enough for flush repairs in 18-gauge or thinner metal.

More info...

About Eastwood Panel Flanger

Make professional-looking and -fitting replacement panels with a neat, precise, offset. Works equally well on the edges of fenders or quarter-panels after rusted areas are cut out. The Panel Flanger's 10" handle give you extra leverage for easy flanges. Strong cam-action jaws produce an offset lip in sheet steel up to 18-gauge, so replacement panels fit flush to the body. Very little grinding is required after welding, and almost no body filler.


Adjustable Locking Panel Flanger


31021 Panel Flanger + Extra-Wide Panel Flanger (Save over individual prices!)

Customer Reviews

Questions & Answers

Customers also viewed: