- Eastwood Radiator Black Paint Gloss Aerosol 12 oz
Eastwood Radiator Black Paint Gloss Aerosol 12 oz
your radiator without damage
Radiator Black Gloss Paint is just the right viscosity to spray-paint your radiator without damaging it
- Won't block air flow between cooling fins
- Won't interfere with heat transfer
- Acrylic enamel (85% gloss)
- Withstands 300 degreesF
Standard engine paints are too thick for use on a radiator because they can interfere with heat transfer, and block air flow between the cooling fins. But Radiator Black Gloss is specifically formulated for your radiator, heater core and air conditioning condenser.
About Eastwood Radiator Black Paint Gloss Aerosol 12 oz
Standard engine paints are too thick for radiator use because they can interfere with heat transfer and block air flow between the cooling fins. Also, standard paint tends to flake off radiator tanks. Radiator Black helps solve this problem. This acrylic enamel factory-finish (85% gloss) withstands 300 degree F., sprays on thick enough to cover completely, yet thin enough to not interfere with heat transfer. Great for heater cores and air conditioning condensers, too! Each 12 oz net wt. can covers 6 sq. ft., most radiators require 2 cans for full coverage.
One 12 oz. net wt. aerosol can. Enamel, covers about 6 sq. ft.
Made in the USA. 30 Day Eastwood Warranty.
Radiator Black is heat resistant to 300 degrees F. This high gloss, low build finish is ideal for radiators. Heavier coatings restrict efficiency. To straighten fins, use our Radiator Plier & Fin Rake Kit (43078). Then wash and spray with PRE Painting Prep aerosol (10041 Z) to remove residual grease and oil. Most radiators require 2 cans. enamel based. Use a light coat of our Self Etching Primer (16014 Z) for greater durability. Use these products in a well ventilated area, or wear a respirator like our Pro Respirator (34029).
Questions & Answers
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesionOnly $8.99