- Radiator Black Gloss Paint 12 oz
Radiator Black Gloss Paint 12 oz
your radiator without damage
- Won't block air flow between cooling fins
- Won't interfere with heat transfer
- Acrylic enamel (85% gloss)
- Withstands 300 degreesF
About Radiator Black Gloss Paint 12 oz
Standard engine paints are too thick for radiator use because they can interfere with heat transfer and block air flow between the cooling fins. Also, standard paint tends to flake off radiator tanks. Radiator Black helps solve this problem. This acrylic enamel factory-finish (85% gloss) withstands 300 degree F., sprays on thick enough to cover completely, yet thin enough to not interfere with heat transfer. Great for heater cores and air conditioning condensers, too! Each 12 oz net wt. can covers 6 sq. ft., most radiators require 2 cans for full coverage. Buy 3 or more and SAVE!
One 12 oz. net wt. aerosol can. Enamel, covers about 6 sq. ft.
Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
Radiator Black is heat resistant to 300 degrees F. This high gloss, low build finish is ideal for radiators. Heavier coatings restrict efficiency. To straighten fins, use our Radiator Plier & Fin Rake Kit (43078). Then wash and spray with PRE Painting Prep aerosol (10041 Z) to remove residual grease and oil. Most radiators require 2 cans. Lacquer based. Use a light coat of our Self Etching Primer (16014 Z) for greater durability. Use these products in a well ventilated area, or wear a respirator like our Pro Respirator (34029).
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesion