- Eastwood Rat Rod Matte Clear Qt w/Activator
Eastwood Rat Rod Matte Clear Qt w/Activator
- Mix 4:1 with activator included
- Produces a 10-15% gloss
- Also ideal for interior parts, underhood components
About Eastwood Rat Rod Matte Clear Qt w/Activator
Eastwood's Rat Rod Matte Clear is a premium acrylic urethane system designed for custom refinishing and other applications where a low-gloss finish is desired. Ideal for use with Eastwood's premium single-stage urethane paints or other manufacturers basecoat systems. My even be used over factory finishes, if the finish is in good condition. Rat Rod Matte clear is also ideal for for interior parts, underhood components, hobbies and crafts. Must be mixed 4:1 with EW activator #21854z. Two medium coats will achive a 10-15% gloss level. May be mixed with EW European Clear for a variety of gloss levels.
32 Fl. Ounces
10194ZP PRE Painting Prep in quarts 51605 Concours HVLP Gun Kit 51686 Concours Detail Gun 20474 4-stage Dry Air System 50040ZP Master Paint Prep Kit 51561Z 6" Liquid Ice Buffing Kit 34053 Hobby Air fresh air breathing system 51559 Digital Regulator
Always wear proper eye, skin and respiratory protection. Always paint in a well ventilated area, away from sparks & open flame. Consult MSDS & Product Data Sheets for proper safety precautions.
4:1 mix ratio with 21854z activator. No additional reduction is necessary. Pot life is approximately 3 to 4 hours. Rat Rod Satin Clear may be blended with Eastwood's 2:1 European Clears in different mix ratios for a variety of gloss levels. Apply Rat Rod Satin Clear in two medium wet coats with approximately 10 minutes flash time required between coats. Applying additional or heavier coats will result in a higher gloss finish. Allow 10-12 minutes for Rat Rod Clear to dry dust free. Fully cures in 18 hours. 2 coat application should achieve 10-15% gloss level at a 60Â³ angle.