Details

About Eastwood Rust Converter Aerosol

This high-tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating that eliminates the need for sanding. The converted protective coating is a suitable primer, and is compatible with most top coats. Additionally, the protective coating will seal the surface against moisture to prevent future rust growth. Applies easily: simply remove loose rust with a wire brush, then spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black. Single component; no more mixing. 12-sq.-ft. coverage per can.

Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.

Eastwood Rust Converter, 13-oz. aerosol

Accessories

10041Z PRE Painting Prep
11949Z Low-VOC PRE Painting Prep
16060Z Rust Encapsulator
10025Z Chassis Black
11175Z Extreme Chassis Black
10426Z Underhood Detailing Kit

Always use appropriate eye, skin, and respiratory protection when using this product. Safety information is also described on the can. Consult MSDS (Material Safety Data Sheet) for proper safety requirement.

Click Here for Material Safety Data Sheet

For use on steel and iron only; DO NOT apply to paint. First use a wire brush to scrape rust off surface. Liberally spray-on Eastwood Rust Converter, let dry 20-30 minutes. Finally, apply top coat such as Eastwood Rust Encapsulator or Chassis Black.