- Eastwood Rust Converter One Gallon
Eastwood Rust Converter One Gallon
- Just brush-on (or spray) to transform the rust
- Penetrates faster than other brands
- No mixing needed
- 200-300-sq.-ft. coverage per gallon jug
About Eastwood Rust Converter One Gallon
This high-tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating that eliminates the need for sanding. The converted protective coating is a suitable primer, and is compatible with most top coats. Plus, the protective coating will seal the surface against moisture to prevent future rust growth. Applies easily: simply remove loose rust with a wire brush, then brush-on or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black. Single component; no more mixing. 200-300-sq.-ft. coverage per gallon jug.
1-gallon jug (128 fl. ozs.)
10041Z PRE Painting Prep
16060Z Rust Encapsulator
10025Z Chassis Black
11175Z Extreme Chassis Black
10426Z Underhood Detailing Kit
51550 Concours Paint Gun
50109Z Ceramic Chassis Black and Epoxy Primer Kit
Safety / MSDS Sheet
Always use appropriate eye, skin, and respiratory protection when using this product. Safety information is also described on the jug label. Consult MSDS (Material Safety Data Sheet) for proper safety requirement.
Applies easily: simply remove loose rust with a wire brush, then brush- or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black.
For use on steel and iron only; DO NOT apply to paint. First use a wire brush to scrape rust off surface. Liberally brush-on or spray-on Eastwood Rust Converter, let dry 20-30 minutes. Finally, apply top coat such as Eastwood Rust Encapsulator or Chassis Black.