• Home
  • Eastwood Rust Converter One Gallon

    Eastwood Rust Converter One Gallon

    Item #51677

    Stops residual rust; turns it into a ready-to-paint coating...no sanding

    Details

    Rust Converter stops residual rust, and turns it into a black, protective, ready-to-paint coating, without sanding Eastwood's own high-tech formula converts rust into a protective polymeric coating that's ready to go as a primer, and is compatible with most top coats. That new protective coating will also seal the surface against moisture to prevent future rust growth.
    • Just brush-on (or spray) to transform the rust
    • Penetrates faster than other brands
    • No mixing needed
    • 200-300-sq.-ft. coverage per gallon jug

    More info...

    About Eastwood Rust Converter One Gallon

    This high-tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating that eliminates the need for sanding. The converted protective coating is a suitable primer, and is compatible with most top coats. Plus, the protective coating will seal the surface against moisture to prevent future rust growth. Applies easily: simply remove loose rust with a wire brush, then brush-on or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black. Single component; no more mixing. 200-300-sq.-ft. coverage per gallon jug.


    Contents

    1-gallon jug (128 fl. ozs.)


    Accessories

    10041Z PRE Painting Prep
    16060Z Rust Encapsulator
    10025Z Chassis Black
    11175Z Extreme Chassis Black
    10426Z Underhood Detailing Kit
    51550 Concours Paint Gun
    50109Z Ceramic Chassis Black and Epoxy Primer Kit


    Safety / MSDS Sheet

    Always use appropriate eye, skin, and respiratory protection when using this product. Safety information is also described on the jug label. Consult MSDS (Material Safety Data Sheet) for proper safety requirement.

    Click Here for Material Safety Data Sheet


    Application

    Applies easily: simply remove loose rust with a wire brush, then brush- or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black.

    For use on steel and iron only; DO NOT apply to paint. First use a wire brush to scrape rust off surface. Liberally brush-on or spray-on Eastwood Rust Converter, let dry 20-30 minutes. Finally, apply top coat such as Eastwood Rust Encapsulator or Chassis Black.