- Eastwood Rust Converter One Quart
Eastwood Rust Converter One Quart
Rust Converter stops residual rust, and turns it into a black, protective, ready-to-paint coating, without sanding
- Just brush-on (or spray) to transform the rust
- Penetrates faster than other brands
- No mixing needed
- 50-sq.-ft. coverage per quart container
Eastwood's own high-tech anti-rust formula converts rust into a protective polymeric coating that's ready to go as a primer, and is compatible with most top coats. That new protective coating will also seal the surface against moisture to prevent future rust growth.
About Eastwood Rust Converter One Quart
This high-tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating that eliminates the need for sanding. The converted protective coating is a suitable primer, and is compatible with most top coats. Plus, the protective coating will seal the surface against moisture to prevent future rust growth. Applies easily: simply remove loose rust with a wire brush, then brush-on Eastwood’s Rust Converter paint. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black. Single component; no more mixing. 50-sq.-ft. coverage per quart container. Made in the USA.
1-quart container (32 fl. ozs.)
10041Z PRE Painting Prep
16060Z Rust Encapsulator
10025Z Chassis Black
11175Z Extreme Chassis Black
10426Z Underhood Detailing Kit
51550 Eastwood Concours HVLP Paint Spray Gun with 1.2mm tip
50109Z 2K Ceramic Chassis Black Gloss & Epoxy Primer Kit
Always use appropriate eye, skin, and respiratory protection when using this product. Safety information is also described on the can. Consult MSDS (Material Safety Data Sheet) for proper safety requirement.
90-day mfr's. warranty against defects.
Applies easily: simply remove loose rust with a wire brush, then brush- or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black.
For use on steel and iron only; DO NOT apply to paint. First use a wire brush to scrape rust off surface. Liberally brush-on or spray-on Eastwood Rust Converter, let dry 20-30 minutes. Finally, apply top coat such as Eastwood Rust Encapsulator or Chassis Black.
Questions & Answers
Customers also viewed:
Stop rust in its tracks! Superior UV Resistance and Convenient Spray Aerosol or Brushable Quarts & Gallons
Starting at: $14.99
Stops rust, and protects the underside of your car!
Starting at: $15.99
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $6.99