- Eastwood Self-Etching Primer Black Aerosol 16 oz
Eastwood Self-Etching Primer Black Aerosol 16 oz
- Adheres to steel, aluminum, stainless steel, scuffed galvanized steel
- 1 aerosol can covers about 10 sq. ft.
- Withstands up to 170 degreesF
Tech Tip:16037 Eastwood Rust Dissolver (Qt.) is ideal for removing light rust before using Self-Etching Primer.
Do you have a product idea? Click Here to suggest it!
About Eastwood Self-Etching Primer Black Aerosol 16 oz
This easy to use aerosol etches and primes bare, rustfree metal in one step. Adheres to steel, aluminum, stainless steel, and galvanized steel and is compatable with virtually any paint or auto finish. This self-etching formula bonds better to bare metals than other aerosol primers. It is also a single- stage formula which requires no catalyst, making it even easier to use.
Contains 16 ounces net weight. Covers about 10 sq ft. Lacquer based. Withstands up to 170 degrees F.
Use our Pre-Painting Prep #10041Z to remove grease and oil before priming. Our Self Etching Primer is NOT recommended under the following products: Chassis Black Aerosol #10025Z, Gloss Chassis Black Aerosol #10000Z, or Chassis Black Quart #10043ZP. Buy 3 or more and SAVE!
Made in the USA. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM
Self Etching Primer etches & primes in 1 step for superior adhesion. Can be used on steel, stainless, aluminum, or scuffed galvanized surfaces. For best results, clean surface to be painted with PRE Painting Prep (10041 Z) or Metal Wash (10120). 1 Aerosol covers about 10 sq ft. Max Temp 170 F. Lacquer based. Goes on thin & can be used with any additional primer or topcoat. For best results, topcoat before 24 hrs. After 24 hrs, surface must be scuffed. Exercise care when using this product over enamel finishes as lifting may occur. Shake can for at least 2 mins before spraying. Work in a well ventilated area.
Customers also viewed:
Removes silicone, wax, polish, grease; promotes paint/powder adhesion