• Home
  • Eastwood Semi Gloss Black 4-1 Quart

    Eastwood Semi Gloss Black 4-1 Quart

    Item #50253ZP Brand: Eastwood

    Only underhood coating fortified with nano-ceramics
    Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations, check with your local and state guidelines as some areas may have stricter regulations than others.

    Details

    Eastwood's new 4:1 2-component (2K) Urethane Ceramic Underhood Black is the only underhood coating fortified with nano-ceramic technology. Nano-ceramic particles ensure the ultimate in durability, chemical resistance and long lasting looks. Eastwood's Underhood Black is the right 10-20% gloss to match that original sheen. For maximum durability apply over Eastwood's Epoxy Primer. To apply mix 4:1 with urethane activator 21854Z and apply using an HVLP spray gun. One quart covers about 48 square feet, depending on number of coats and thickness.

    More info...

    About Eastwood Semi Gloss Black 4-1 Quart

    Eastwood's new 4:1 2-component (2K) Urethane Ceramic Underhood Black is the only Underhood coating fortified with nano-cermaic technology. Nano-ceramic particles ensure the ultimate in durability, chemical resistance and long lasting looks. Eastwood's Underhood Black is the right 10-20% gloss to match that original sheen. For maximum durability apply over Eastwood's Epoxy Primer. To apply mix 4:1 with urethane activator 21854Z and apply using an HVLP spray gun. One quart covers about 48 square feet, depending on number of coats and thickness.


    Contents

    32 fl oz, one US Quart


    Accessories

    21854Z Activator 10041Z PRE painting prep 51550 Concours HVLP sparay gun 12817 Paint gun accessory kit 50242ZP/50243ZP Epoxy Primer 51482Z Rust converter 11455/11456 respirator 51559 Digital Regulator


    Safety

    Keep away from heat sparks and open flame. Avoid prolonged contact with skin and breathing of vapors. Always wear appropriate eye, skin and respiratory protection. Consult MSDS for specific safety instructions and procautions.


    Warranty

    Made in USA UN # is 12363 UN numbers range from UN0001 to about UN3500 and are assigned by the United Nations Committee of Experts on the Transport of Dangerous Goods. There is no UN number allocated to non-hazardous substances.


    Application

    To apply mix 4:1 with urethane activator 21854Z Reduction is not necessary, but can be achieved using 50104ZP Urethane reducer Apply in two medium wet coats allowing 10-15 minutes between each coat. A dry film thickness of 2 Mils is recommended, complete sure time is 24 hours. Use an HVLP gun with 1.2-1.5 nozzle size. Pot life is approximatley 2 hours


    Customers also viewed: