• Home
  • Eastwood Semi Gloss Black 4-1 Quart
Eastwood Semi Gloss Black 4-1 Quart is rated 3.0 out of 5 by 1.
Rated 3 out of 5 by from Prepare for a long mix The drawback to this paint that has A LOT of solids in it is it takes about 45 minutes to get the solids completely dissolved in the can. It sprays ks nice and looks good when completed.
Date published: 2010-12-29
  • 2015-03-04T10:07CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_50253ZP, PRD, sort_relevancy
  • clientName_eastwood

Hi, I'm planning to paint my firewall with this paint (black). Can i sand down my 2K red regular  carpaint and apply this underhood black directly on the old paint, or should I first put on a coat with some kind of primer on the old red paint?

Asked by: Erlend
You would want to use a urethane primer before the top coat of paint.
Answered by: SeanA
Date published: 2014-12-18
  • 2015-03-04T11:22CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_50253ZP, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Semi Gloss Black 4-1 Quart

Item #50253ZP Brand: Eastwood

Only underhood coating fortified with nano-ceramics
Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations, check with your local and state guidelines as some areas may have stricter regulations than others.

Details

Eastwood's new 4:1 2-component (2K) Urethane Ceramic Underhood Black is the only underhood coating fortified with nano-ceramic technology. Nano-ceramic particles ensure the ultimate in durability, chemical resistance and long lasting looks. Eastwood's Underhood Black is the right 10-20% gloss to match that original sheen. For maximum durability apply over Eastwood's Epoxy Primer. To apply mix 4:1 with urethane activator 21854Z and apply using an HVLP spray gun. One quart covers about 48 square feet, depending on number of coats and thickness.

More info...

About Eastwood Semi Gloss Black 4-1 Quart

Eastwood's new 4:1 2-component (2K) Urethane Ceramic Underhood Black is the only Underhood coating fortified with nano-cermaic technology. Nano-ceramic particles ensure the ultimate in durability, chemical resistance and long lasting looks. Eastwood's Underhood Black is the right 10-20% gloss to match that original sheen. For maximum durability apply over Eastwood's Epoxy Primer. To apply mix 4:1 with urethane activator 21854Z and apply using an HVLP spray gun. One quart covers about 48 square feet, depending on number of coats and thickness.


Contents

32 fl oz, one US Quart


Accessories

21854Z Activator 10041Z PRE painting prep 51550 Concours HVLP sparay gun 12817 Paint gun accessory kit 50242ZP/50243ZP Epoxy Primer 51482Z Rust converter 11455/11456 respirator 51559 Digital Regulator


Safety

Keep away from heat sparks and open flame. Avoid prolonged contact with skin and breathing of vapors. Always wear appropriate eye, skin and respiratory protection. Consult MSDS for specific safety instructions and procautions.


Warranty

Made in USA UN # is 12363 UN numbers range from UN0001 to about UN3500 and are assigned by the United Nations Committee of Experts on the Transport of Dangerous Goods. There is no UN number allocated to non-hazardous substances.


Application

To apply mix 4:1 with urethane activator 21854Z Reduction is not necessary, but can be achieved using 50104ZP Urethane reducer Apply in two medium wet coats allowing 10-15 minutes between each coat. A dry film thickness of 2 Mils is recommended, complete sure time is 24 hours. Use an HVLP gun with 1.2-1.5 nozzle size. Pot life is approximatley 2 hours


Customers also viewed: