- Eastwood Skip-Proof Spot Weld Cutter Kit
Eastwood Skip-Proof Spot Weld Cutter Kit is rated out of 5 by 4.
Rated 4 out of 5 by from Technical Points Well I was a little disappointed at first. Looking at the picture of this cutter I expected that it would drill a hole into the metal with that inner Bit. That doesn't really happen. It just kind of cuts into the weld and helps stabilize the cutting bit. Now this doesn't really "stabilize" it and this is not "skip-proof" either. It will skip on those sloppy factory welds, but IF you go slow it's a ton better that the other "brand". As far as life of the cutter and bit. I so far have cut about 60 to 75 weld with the first cutter. in an attempt to stabilize the cutter better I pre-drilled a pilot hole and when I plunged the cutter down, the cutter center bit broke through and that broke my weld cutter. I've used no lube, just set my cordless on low speed and I believe I could get at least 100 cuts with no problem. You WON"T be sorry if you spend the money on this very expensive cutter.
Date published: 2013-11-07
Rated 4 out of 5 by Sean from Works well but beware. This item works extremely well! But be forwarned, I am doing a trunk pan installation on a 72 Buick GS and I ate through 3 of these in about 112 spot weld holes. These are only good for about 30 some welds until they go dull. I used cutting fluid on every cut to provide maximum life. Work great but not long.
Date published: 2009-08-20
Rated 3 out of 5 by MarkDL from Not so skip proof I was hoping this was my answer to cutting spot welds. It really did not work any better than the cheap one I bought years ago. The center drill really does not do any thing better than the center punch on the cheap one does. If you pre drill the center it works. But that kind of defeats the purpose.
Date published: 2014-12-07
Rated 4 out of 5 by Gregory from Great Tool Great tool, even with cutting oil the bits will wear relatively quick, but works excellent and have broken none of the heads as of yet. will def buy heads as needed
Date published: 2013-09-09
Eastwood Skip-Proof Spot Weld Cutter Kit
Item #11283 Brand: Eastwood
Includes three 3/8"-dia. cutters, 2 "skip-proof" pilot bits, and case
Skip-Proof Spot Weld Cutter Set effortlessly drills-out spot welds Three 1-piece cutters make clean cuts through spot welds, without damaging the bottom panel, with little or no grinding required to finish the job. Pilot bits included to prevent skipping.More info...
- Three 3/8"-dia. cutters (0.090" wall)
- 2 skip-proof pilot bits
- Storage case
About Eastwood Skip-Proof Spot Weld Cutter Kit
Premium Spot Weld Cutter Kit is perfect for removing spot welds in auto body and automotive restoration. Comes with skip-proof pilot bits.
Three 3/8"-dia. Cutters (0.090" wall)
2 Skip-Proof Pilot Bits
Customers also viewed:
Drill twice as many holes as you could with a single-ended cutterOnly $21.99
3/8" cutter drills-out spot welds, with minimal grinding to finishOnly $26.99
1/2" cutter drills-out spot welds, with minimal grinding to finishOnly $35.69
Super-alloy cobalt steel cuts faster and lasts longer than HSSOnly $125.99
Replaces the drill in our "Skip-Proof" Spot-Weld Cutter #11276Only $21.19
Includes three 3/8"-dia. cutters, arbor, extra pilot, and caseOnly $61.79