- Eastwood Spray Gray Detail Paint Aerosol 12 oz
Eastwood Spray Gray Detail Paint Aerosol 12 oz
the look of freshly cast iron
Spray Gray matches original equipment with the look of fresh cast iron.
- Renew cast iron water pumps, intake manifolds, master cylinders and more
- Acrylic lacquer
- Natural low 4% to 15% gloss
Spray Gray Detail Paint is specially formulated to duplicate the original look of cast iron on your car parts, and protects up to 300 degrees F to keep them looking new for a long time.
About Eastwood Spray Gray Detail Paint Aerosol 12 oz
Spray Gray Detail Paint is specially formulated to duplicate the original look of cast iron parts on your car. Protected up to 300 degrees F by this paint, metal parts on your car will keep that brand new look for a long time. Available in aerosol and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on cast iron water pumps, intake manifolds, master cylinders and more.
Spray Gray available in Qts (10065 ZP) is an acrylic lacquer that resembles fresh cast iron. Works great on Master Cylinder, Wheel Cylinder, Water Pumps. One 12 oz aerosol can covers 6 Sq. Ft, Max Temp 300F.
Made in the USA. 30 day Eastwood Warranty.
Spray Gray is an acrylic lacquer that withstands up to 300 degrees F. Covers 6 sq ft. We recommend PRE Painting Prep (10041 Z) to remove oil. Spray Gray can be applied directly to bare metal surfaces. For better durability, prime with our Self Etching Primer (16014 Z) Aerosol, or (16009 ZP) Quart. If the metal is rusty, use Eastwood Rust Encapsulator (16040 Z) Aerosol. Use these products in a well ventilated area, or use a respirator like our SAS Bandit Respirator (11455 or 11456).
Questions & Answers
Customers also viewed:
The perfect lacquer for a correct, OEM-matching finish under the hood
Starting at: $8.99