• Home
  • Spray Gray Detail Paint Aerosol 12 oz
Spray Gray Detail Paint Aerosol 12 oz is rated 4.3333 out of 5 by 6.
Rated 5 out of 5 by from Super Product I have done several restorations and this product leaves a natural cast iron look, plus it has the protection of paint, eliminating the rust factor that is always a by product of raw metal. The fan spray tip leaves a smooth finish. Excellent results every time!
Date published: 2014-12-11
Rated 4 out of 5 by from Spray Gray Detail Paint As advertised this product looks just like fresh cast iron.Only better. Applies nicely. The spray tip has a wide pattern that covers well with just two even coats.Blends well if you scratch it and have to touch it up.Very happy with the results.
Date published: 2014-08-05
Rated 4 out of 5 by from Excellent product Great product. I used it on a cast iron transmission & bell housing. They came out looking like new. I am NOT a good painter but this product covered well with no runs-great job eastwood
Date published: 2010-10-23
Rated 4 out of 5 by from excellent A little pricey - but no other paint comes close to the cast look that this gives. highly recommend for any restoration
Date published: 2014-02-04
Rated 4 out of 5 by from Great product Eastwood has fantastic products not found in local stores. I just wish shipping was a bit more affordable.
Date published: 2015-03-11
Rated 5 out of 5 by from Great Look for Cast Iron Paint does a good job of resembling cast iron and goes on well. I recommend it.
Date published: 2015-03-31
  • 2015-05-02T09:43CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_10032Z, PRD, sort_relevancy
  • clientName_eastwood

Spray Gray Detail Paint Aerosol 12 oz

Item #10032Z

Matches original equipment with
the look of freshly cast iron

Details

Spray Gray matches original equipment with the look of fresh cast iron Spray Gray Detail Paint is specially formulated to duplicate the original look of cast iron on your car parts, and protects up to 300 degrees F to keep them looking new for a long time.
  • Renew cast iron water pumps, intake manifolds, master cylinders and more
  • Acrylic lacquer
  • Natural low 4% to 15% gloss
Buy 3 or more, mix and match, and SAVE!

Do you have a product idea? Click Here to suggest it!

More info...

About Spray Gray Detail Paint Aerosol 12 oz

Spray Gray Detail Paint is specially formulated to duplicate the original look of cast iron parts on your car. Protected up to 300 degrees F by this paint, metal parts on your car will keep that brand new look for a long time. Available in aerosol and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on cast iron water pumps, intake manifolds, master cylinders and more.


Contents

Spray Gray available in Qts (10065 ZP) is an acrylic lacquer that resembles fresh cast iron. Works great on Master Cylinder, Wheel Cylinder, Water Pumps. One 12 oz aerosol can covers 6 Sq. Ft, Max Temp 300F.



Warranty

Made in the USA. 30 day Eastwood Warranty.


Application

Spray Gray is an acrylic lacquer that withstands up to 300 degrees F. Covers 6 sq ft. We recommend PRE Painting Prep (10041 Z) to remove oil. Spray Gray can be applied directly to bare metal surfaces. For better durability, prime with our Self Etching Primer (16014 Z) Aerosol, or (16009 ZP) Quart. If the metal is rusty, use Eastwood Rust Encapsulator (16040 Z) Aerosol. Use these products in a well ventilated area, or use a respirator like our SAS Bandit Respirator (11455 or 11456).


Customers also viewed: